Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Phenolic Resiten® LV355 Iten Industries
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Iten Industries/Resiten® LV355 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 横向流量:3.18mm | ASTM D256 | 46 J/m |
| 流量:1.57mm | ASTM D256 | 65 J/m | |
| 流量:12.7mm | ASTM D256 | 54 J/m | |
| 流量:3.18mm | ASTM D256 | 61 J/m | |
| 横向流量:1.57mm | ASTM D256 | 47 J/m | |
| 横向流量:12.7mm | ASTM D256 | 48 J/m |
| Supplementary Information | Test Condition | Test Method | Iten Industries/Resiten® LV355 |
|---|---|---|---|
| Viscosity | 1.27cm | ASTM D229 | 880000 g |
| Mechanical properties | Test Condition | Test Method | Iten Industries/Resiten® LV355 |
|---|---|---|---|
| compressive strength | 12.7mm6 | ASTM D695 | 84.8 MPa |
| bending strength | 12.7mm4 | ASTM D790 | 121 MPa |
| 3.18mm4 | ASTM D790 | 122 MPa | |
| 1.57mm5 | ASTM D790 | 110 MPa | |
| compressive strength | 12.7mm8 | ASTM D695 | >310 MPa |
| bending strength | 1.57mm4 | ASTM D790 | 147 MPa |
| tensile strength | 流量:1.57mm | ASTM D638 | 88.9 MPa |
| bending strength | 3.18mm5 | ASTM D790 | 105 MPa |
| compressive strength | 3.18mm8 | ASTM D695 | >310 MPa |
| 3.18mm7 | ASTM D695 | 170 MPa | |
| 3.18mm6 | ASTM D695 | 173 MPa | |
| tensile strength | 横向流量:3.18mm | ASTM D638 | 68.9 MPa |
| 横向流量:1.57mm | ASTM D638 | 55.8 MPa | |
| 流量:3.18mm | ASTM D638 | 93.8 MPa | |
| compressive strength | 1.57mm7 | ASTM D695 | 63.4 MPa |
| bending strength | 12.7mm5 | ASTM D790 | 99.3 MPa |
| compressive strength | 1.57mm6 | ASTM D695 | 64.1 MPa |
| Electrical performance | Test Condition | Test Method | Iten Industries/Resiten® LV355 |
|---|---|---|---|
| Surface Resistivity | 1.57mm | ASTM D257 | 2.2E+11 ohms |
| 3.18mm | ASTM D257 | 1.6E+12 ohms | |
| dielectric strength | 1.57mm | ASTM D149 | 17 kV/mm |
| Dissipation Factor | 3.18mm,1MHz | ASTM D150 | 0.046 |
| dielectric strength | 1.57mm | ASTM D149 | 83000 V |
| Volume resistivity | 3.18mm | ASTM D257 | 1.1E+10 ohms·cm |
| dielectric strength | 3.18mm | ASTM D149 | 14 kV/mm |
| dielectric constant | 1.57mm,1MHz | ASTM D150 | 5.68 |
| Dissipation Factor | 3.18mm,1kHz | ASTM D150 | 0.093 |
| 3.18mm,60Hz | ASTM D150 | 0.27 | |
| arc resistance | 3.18mm | ASTM D495 | 148 sec |
| Dissipation Factor | 1.57mm,60Hz | ASTM D150 | 0.22 |
| 1.57mm,1kHz | ASTM D150 | 0.79 | |
| arc resistance | 12.7mm | ASTM D495 | 63.0 sec |
| dielectric constant | 1.57mm,60Hz | ASTM D150 | 7.84 |
| 1.57mm,1kHz | ASTM D150 | 6.81 | |
| Dissipation Factor | 1.57mm,1MHz | ASTM D150 | 0.043 |
| arc resistance | 1.57mm | ASTM D495 | 143 sec |
| dielectric strength | 1.27cm | ASTM D149 | 57000 V |
| dielectric constant | 3.18mm,1MHz | ASTM D150 | 6.15 |
| dielectric strength | 3.18mm | ASTM D149 | 73000 V |
| Volume resistivity | 1.57mm | ASTM D257 | 4.4E+10 ohms·cm |
| dielectric constant | 3.18mm,1kHz | ASTM D150 | 7.56 |
| 3.18mm,60Hz | ASTM D150 | 9.49 |
| flammability | Test Condition | Test Method | Iten Industries/Resiten® LV355 |
|---|---|---|---|
| UL flame retardant rating | 12.7mm | UL 94 | V-0 |
| 3.2mm | UL 94 | HB | |
| 1.6mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Iten Industries/Resiten® LV355 |
|---|---|---|---|
| Water absorption rate | 24hr,3.18mm | ASTM D570 | 1.2 % |
| density | --2 | ASTM D792 | 1.35 g/cm³ |
| Water absorption rate | 24hr,1.57mm | ASTM D570 | 2.0 % |
| density | --3 | ASTM D792 | 1.36 g/cm³ |
| Water absorption rate | 24hr,12.7mm | ASTM D570 | 0.74 % |
| Thermal performance | Test Condition | Test Method | Iten Industries/Resiten® LV355 |
|---|---|---|---|
| Linear coefficient of thermal expansion | TD:3.18mm | 2.2E-05 cm/cm/°C | |
| MD:3.18mm | 2.6E-05 cm/cm/°C |
Contact Us
Get App
Top