Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM TF-10XAP JAPAN POLYPLASTIC
DURACON®
Electronic and electrical
heat-resisting
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodJAPAN POLYPLASTIC/TF-10XAP
Charpy Notched Impact Strength23°CISO 179/1eA12 kJ/m²
hardnessTest ConditionTest MethodJAPAN POLYPLASTIC/TF-10XAP
Rockwell hardnessM级ISO 2039-265
Supplementary InformationTest ConditionTest MethodJAPAN POLYPLASTIC/TF-10XAP
ColorNumberCF2003/CF2004
Mechanical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/TF-10XAP
Wear factor0.060MPa,0.15m/sec7JISK7218700 10^-8mm³/N·m
0.060MPa,0.15m/sec6JISK7218600 10^-8mm³/N·m
Tensile modulusISO 527-21850 Mpa
coefficient of friction与钢-动态3JISK72180.30
Nominal tensile fracture strainISO 527-255 %
Wear factor0.49MPa,0.30m/sec4JISK7218<1.0 10^-8mm³/N·m
bending strengthISO 17860.0 Mpa
Wear factor0.49MPa,0.30m/sec5JISK7218100 10^-8mm³/N·m
coefficient of frictionDynamic2JISK72180.60
Flexural modulusISO 1781700 Mpa
tensile strength ISO 527-246.0 Mpa
Electrical performanceTest ConditionTest MethodJAPAN POLYPLASTIC/TF-10XAP
Volume resistivityIEC 600931E+13 ohms·cm
Surface ResistivityIEC 600937E+12 ohms
physical property Test ConditionTest MethodJAPAN POLYPLASTIC/TF-10XAP
Melt volume flow rate190°C/2.16kgISO 11339.00 cm3/10min
Shrinkage rateMD:2.00mmISO 294-41.9 %
Water absorption rate23°C,24hrISO 620.70 %
densityISO 11831.38 g/cm³
melt mass-flow rate190°C/2.16kgISO 113310 g/10min
Shrinkage rateTD:2.00mmISO 294-41.7 %
Thermal performanceTest ConditionTest MethodJAPAN POLYPLASTIC/TF-10XAP
Linear coefficient of thermal expansionTD：23to55°C内部方法1.3E-04 cm/cm/°C
MD：23到55°C内部方法1.3E-04 cm/cm/°C
Heat distortion temperature1.8MPa,未退火，HDTISO 75-2/A82.0 °C

Contact Us

Get App

Top