plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPS FZ-1140-E1 DIC JAPAN
DIC.PPS 
--
Filler: Glass fiber reinf,40% filler by weight
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodDIC JAPAN/FZ-1140-E1
Rockwell hardnessM-ScaleASTM D785100
R-ScaleASTM D785121
thermal performanceTest ConditionTest MethodDIC JAPAN/FZ-1140-E1
Hot deformation temperature1.8MPa,UnannealedASTM D648265 °C
Linear coefficient of thermal expansionTD:-30to90°CASTM D6962.2E-05 cm/cm/°C
MD:-30to90°CASTM D6962.2E-05 cm/cm/°C
mechanical propertiesTest ConditionTest MethodDIC JAPAN/FZ-1140-E1
Bending modulusASTM D79013500 Mpa
bending strengthASTM D790260 Mpa
compressive strengthASTM D695190 Mpa
elongationBreakASTM D6381.5 %
Elongation at BreakASTM D7902.0 %
Friction coefficientSteel - DynamicASTM D18940.35
Steel - StaticASTM D18940.35
Poisson's ratio0.36
Tensile modulusASTM D63815000 Mpa
tensile strengthASTM D638170 Mpa
Electrical performanceTest ConditionTest MethodDIC JAPAN/FZ-1140-E1
Arc resistanceASTM D495125 sec
Compared to the anti leakage trace indexASTM D3638PLC 4
Dielectric constant1MHzASTM D1504.00
Dielectric strength1.60mmASTM D14916 KV/mm
Dissipation factor1MHzASTM D1502E-03
Volume resistivityASTM D2571E+16 ohms·cm
Physical propertiesTest ConditionTest MethodDIC JAPAN/FZ-1140-E1
Shrinkage rateMDASTM D9550.25 %
TDASTM D9551.1 %
Water absorption rate23°C,24hrASTM D5700.020 %
impact performanceTest ConditionTest MethodDIC JAPAN/FZ-1140-E1
Suspended wall beam without notch impact strengthASTM D256450 J/m
flammabilityTest ConditionTest MethodDIC JAPAN/FZ-1140-E1
UL flame retardant rating0.40mmUL 94V-0