Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC+Polyester Iupilon® MB4405U Mitsubishi Chemical Corporation
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodMitsubishi Chemical Corporation/Iupilon® MB4405U
Charpy Notched Impact Strength23°CISO 17950 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179NoBreak
Mechanical propertiesTest ConditionTest MethodMitsubishi Chemical Corporation/Iupilon® MB4405U
Nominal tensile fracture strainISO 527-2150 %
Tensile modulusISO 527-22000 MPa
Tensile strain屈服ISO 527-24.6 %
tensile strength 屈服ISO 527-249.0 MPa
Flexural modulusISO 1781900 MPa
bending strengthISO 17872.0 MPa
physical property Test ConditionTest MethodMitsubishi Chemical Corporation/Iupilon® MB4405U
Shrinkage rateTD:3.20mm0.60to0.80 %
MD:3.20mm0.60to0.80 %
Water absorption rate饱和,23°CISO 620.30 %
Melt volume flow rate300°C/1.2kgISO 113317.0 cm³/10min
densityISO 11831.20 g/cm³
melt mass-flow rate300°C/1.2kgISO 113318 g/10min
Thermal performanceTest ConditionTest MethodMitsubishi Chemical Corporation/Iupilon® MB4405U
Heat distortion temperature0.45MPa,未退火,HDTISO 75-2/B95.0 °C
1.8MPa,未退火,HDTISO 75-2/A80.0 °C
Linear coefficient of thermal expansionMDISO 11359-27.5E-05 cm/cm/°C
TDISO 11359-28E-05 cm/cm/°C

Contact Us

Get App

Top