Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP C-FR(V0/1,6)-HS-ECO Witcom Engineering Plastics B.V.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | Witcom Engineering Plastics B.V./C-FR(V0/1,6)-HS-ECO |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/1A | 9.0 kJ/m² | |
| Tensile strain | 断裂 | ISO 527-2 | > 100 % |
| tensile strength | 断裂 | ISO 527-2 | 20.0 MPa |
| Suspended wall beam without notch impact strength | ISO 180/1U | 无断裂 | |
| Flexural modulus | ISO 178 | 1700 MPa | |
| bending strength | ISO 178 | 30.0 MPa |
| Electrical performance | Test Condition | Test Method | Witcom Engineering Plastics B.V./C-FR(V0/1,6)-HS-ECO |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 | |
| Surface Resistivity | ASTM D257 | 1E+15 ohm |
| physical property | Test Condition | Test Method | Witcom Engineering Plastics B.V./C-FR(V0/1,6)-HS-ECO |
|---|---|---|---|
| Water absorption rate | 饱和, 23℃ | ISO 62 | 0.030 % |
| density | ISO 1183 | 1.04 g/cm³ | |
| Shrinkage rate | MD：3.00 mm | ISO 294-4 | 1.5 to 2.0 % |
| Water absorption rate | 平衡, 23℃, 50% RH | ISO 62 | 0.010 % |
| Thermal performance | Test Condition | Test Method | Witcom Engineering Plastics B.V./C-FR(V0/1,6)-HS-ECO |
|---|---|---|---|
| Linear coefficient of thermal expansion | ISO 11359-2 | 1.5E-06 cm/cm/℃ | |
| UL flame retardant rating | 1.60 mm | UL 94 | V-0 |
| Heat distortion temperature | 1.8 MPa, 未退火，HDT | ISO 75-2/A | 55.0 ℃ |
| RTI Imp | 3.00 mm | UL 746 | 75.0 ℃ |
| Burning wire flammability index | 1.60 mm | IEC 60695-2-12 | 960 ℃ |
Contact Us
Get App
Top