Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PS Electroblend® HIPS-1802 Colour Image Plastic Compound Sdn. Bhd. (CIPC)
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Colour Image Plastic Compound Sdn. Bhd. (CIPC)/Electroblend® HIPS-1802 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 85 J/m |
| Mechanical properties | Test Condition | Test Method | Colour Image Plastic Compound Sdn. Bhd. (CIPC)/Electroblend® HIPS-1802 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 15 % |
| tensile strength | ASTM D638 | 24.0 MPa | |
| Flexural modulus | ASTM D790 | 2150 MPa | |
| bending strength | ASTM D790 | 38.0 MPa |
| Electrical performance | Test Condition | Test Method | Colour Image Plastic Compound Sdn. Bhd. (CIPC)/Electroblend® HIPS-1802 |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | 1.0E+3到1.0E+5 ohms |
| flammability | Test Condition | Test Method | Colour Image Plastic Compound Sdn. Bhd. (CIPC)/Electroblend® HIPS-1802 |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Colour Image Plastic Compound Sdn. Bhd. (CIPC)/Electroblend® HIPS-1802 |
|---|---|---|---|
| melt mass-flow rate | 200°C/5.0kg | ASTM D1238 | 1.3 g/10min |
| Shrinkage rate | MD：3.20mm | ASTM D955 | 0.40to0.60 % |
| density | ASTM D792 | 1.14 g/cm³ |
| Thermal performance | Test Condition | Test Method | Colour Image Plastic Compound Sdn. Bhd. (CIPC)/Electroblend® HIPS-1802 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火,4.00mm，HDT | ASTM D648 | 74.0 °C |
Contact Us
Get App
Top