Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 NYLEM® 66 GFR 30 FR V0 EMAS Plastik San.Tic.AS.
--
--
Fillers, glass fiber reinforced materials
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | EMAS Plastik San.Tic.AS./NYLEM® 66 GFR 30 FR V0 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/1A | >10 kJ/m² |
| hardness | Test Condition | Test Method | EMAS Plastik San.Tic.AS./NYLEM® 66 GFR 30 FR V0 |
|---|---|---|---|
| Shore hardness | 邵氏D | ISO 868 | 80to85 |
| Mechanical properties | Test Condition | Test Method | EMAS Plastik San.Tic.AS./NYLEM® 66 GFR 30 FR V0 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 7500to10000 MPa | |
| Tensile strain | 断裂 | ISO 527-2 | >3.0 % |
| tensile strength | 屈服 | ISO 527-2 | 120to150 MPa |
| flammability | Test Condition | Test Method | EMAS Plastik San.Tic.AS./NYLEM® 66 GFR 30 FR V0 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 | |
| Hot filament ignition temperature | VDE0471/2 | 960 °C |
| physical property | Test Condition | Test Method | EMAS Plastik San.Tic.AS./NYLEM® 66 GFR 30 FR V0 |
|---|---|---|---|
| Shrinkage rate | 0.25to0.35 % | ||
| density | ISO 1183 | 1.40to1.45 g/cm³ |
| Thermal performance | Test Condition | Test Method | EMAS Plastik San.Tic.AS./NYLEM® 66 GFR 30 FR V0 |
|---|---|---|---|
| vicat | ISO 306/B | 255 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 250 °C |
| melting temperature | ISO 3146 | 265 °C |
Contact Us
Get App
Top