Material Comparison
Add Comparison Model
Select Products for Comparison (1/4)
Highlight Differences
Hide Same
Product Name / Manufacturer / Model
Reference Price
| Physical properties | Test Condition | Test Method | PBI USA/TU-60 |
|---|---|---|---|
| Water absorption rate | Equilibrium | ASTM D570 | 6.5 % |
| mechanical properties | Test Condition | Test Method | PBI USA/TU-60 |
| Compressive modulus | ASTM D695 | 2960 Mpa | |
| elongation | Break | ASTM D638 | 2.2 % |
| compressive strength | ASTM D695 | 207 Mpa | |
| Bending modulus | ASTM D790 | 5000 Mpa | |
| tensile strength | ASTM D638 | 100 Mpa | |
| Tensile modulus | ASTM D638 | 5030 Mpa | |
| bending strength | ASTM D790 | 175 Mpa | |
| hardness | Test Condition | Test Method | PBI USA/TU-60 |
| Rockwell hardness | A-Sale | ASTM D785 | 25 |
| Electrical performance | Test Condition | Test Method | PBI USA/TU-60 |
| Volume resistivity | ASTM D257 | 2E+16 ohms·cm | |
| Arc resistance | ASTM D495 | 135 sec | |
| Dissipation factor | 10kHz | ASTM D150 | 1E-03 |
| 1kHz | ASTM D150 | 0.0 | |
| Dielectric constant | 10kHz | ASTM D150 | 3.40 |
| 1kHz | ASTM D150 | 3.40 | |
| Dielectric strength | ASTM D149 | 17 KV/mm | |
| Supplementary Information | Test Condition | Test Method | PBI USA/TU-60 |
| Initial weightlessness temperature | Air | Internal Method | 499 °C |
| Nitrogen | Internal Method | 499 °C | |
| thermal performance | Test Condition | Test Method | PBI USA/TU-60 |
| Linear coefficient of thermal expansion | MD:199to299°C | TMA | 7E-05 cm/cm/°C |
| MD:24to149°C | TMA | 3.4E-05 cm/cm/°C |
