Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA6 CM1017XL3 TORAY JAPAN
Amilan®
Automotive sector,Shell,Electrical components,Electrical appliances
heat-resisting,Low temperature toughness,Fast forming cycle
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | TORAY JAPAN/CM1017XL3 |
---|---|---|---|
Rockwell hardness | R-Sale,80°C | 80 -- | |
R-Sale,23°C | 119 |
thermal performance | Test Condition | Test Method | TORAY JAPAN/CM1017XL3 |
---|---|---|---|
Hot deformation temperature | 0.45MPa,Unannealed | °C | 182 -- |
Linear coefficient of thermal expansion | MD | cm/cm/°C | 8E-05 -- |
Melting temperature | °C | 225 -- | |
225 ℃(℉) | |||
specific heat | J/kg/°C | 1900 -- | |
thermal conductivity | W/m/K | 0.25 -- |
mechanical properties | Test Condition | Test Method | TORAY JAPAN/CM1017XL3 |
---|---|---|---|
Bending modulus | -40°C | MPa | 3800 3600 |
80°C | MPa | 700 300 | |
23°C | 2800 MPa | ||
bending strength | -40°C | 135 MPa | |
80°C | MPa | 40.0 25.0 | |
23°C | MPa | 110 40.0 | |
Compressive stress | 23°C | MPa | 80.0 -- |
Friction coefficient vs. Metal | 0.15to0.20 -- | ||
Rockwell hardness | ASTM D785 | 80 | |
shear strength | 23°C | MPa | 70.0 65.0 |
Taber abraser | 1000Cycles | mg | 3.00to4.00 -- |
Tensile strain | Break,23°C | % | 38 |
Yield,23°C | % | 1.5 -- | |
tensile strength | -40°C | 110 MPa | |
80°C | MPa | 25.0 20.0 | |
23°C | MPa | 80.0 35.0 |
Electrical performance | Test Condition | Test Method | TORAY JAPAN/CM1017XL3 |
---|---|---|---|
Arc resistance | sec | 120 -- | |
Compared to the anti leakage trace index | CTI | V | -- |
Dielectric constant | 23°C,1kHz | 3.90 8.00 | |
23°C,1MHz | 3.40 4.50 | ||
23°C,50Hz | 4.10 9.00 | ||
Dielectric strength | kV/mm | 20 -- | |
Dissipation factor | 23°C,50Hz | 0.070 0.10 | |
23°C,1kHz | 0.060 0.11 | ||
23°C,1MHz | 0.030 0.13 | ||
Volume resistivity | ohms·cm | 1.0E+14-1.0E+15 1.0E+11到1.0E+12 | |
ASTM D257/IEC 60093 | 10^12-13 Ω.cm |
Physical properties | Test Condition | Test Method | TORAY JAPAN/CM1017XL3 |
---|---|---|---|
density | ASTM D792/ISO 1183 | 1.13 | |
Shrinkage rate | MD:1.00mm3 | % | 0.70-1.1 -- |
MD:3.00mm4 | % | 1.2-1.8 -- | |
Water absorption rate | Saturation,23°C | % | 11 -- |
23°C,24hr | % | 1.8 -- | |
ASTM D570/ISO 62 | 1.8 % |
impact performance | Test Condition | Test Method | TORAY JAPAN/CM1017XL3 |
---|---|---|---|
Impact strength of simply supported beam without notch | -40°C | 无断裂 -- | |
23°C | 无断裂 -- |
flammability | Test Condition | Test Method | TORAY JAPAN/CM1017XL3 |
---|---|---|---|
UL flame retardant rating | 0.79mm | V-2 -- |