Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TPC-ES CM551 DSM Additive Manufacturing
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodDSM Additive Manufacturing/ CM551
Charpy Notched Impact Strength-30°CISO 179/1eA5.6 kJ/m²
Impact strength of cantilever beam gap-20°CISO 180/1A9.0 kJ/m²
-30°CISO 180/1A6.4 kJ/m²
Charpy Notched Impact Strength23°CISO 179/1eANoBreak
Impact strength of cantilever beam gap23°CISO 180/1ANoBreak
hardnessTest ConditionTest MethodDSM Additive Manufacturing/ CM551
Shore hardness邵氏A,15秒ISO 86898
邵氏A,3秒ISO 86898
邵氏D,3秒ISO 86851
邵氏D,15秒ISO 86851
Electrical performanceTest ConditionTest MethodDSM Additive Manufacturing/ CM551
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 0
dielectric strengthIEC 60243-115 kV/mm
Volume resistivityIEC 60093>1.0E+15 ohms·cm
relative permittivity100HzIEC 602504.34
Dissipation Factor100HzIEC 602500.021
relative permittivity1MHzIEC 602503.58
Dissipation Factor1MHzIEC 602500.046
Mechanical propertiesTest ConditionTest MethodDSM Additive Manufacturing/ CM551
Nominal tensile fracture strainISO 527-2450 %
tensile strength 断裂ISO 527-232.0 MPa
Tensile modulusISO 527-2160 MPa
tensile strength 100%应变ISO 527-216.0 MPa
5.0%应变ISO 527-28.40 MPa
50%应变ISO 527-217.0 MPa
10%应变ISO 527-212.0 MPa
physical property Test ConditionTest MethodDSM Additive Manufacturing/ CM551
Water absorption rate平衡,23°C,50%RHISO 620.11 %
densityISO 11831.24 g/cm³
Melt volume flow rate230°C/2.16kgISO 11338.00 cm³/10min
Thermal performanceTest ConditionTest MethodDSM Additive Manufacturing/ CM551
melting temperatureISO 11357-3205 °C
vicatISO 306/B5061.0 °C
Linear coefficient of thermal expansionTDISO 11359-21.9E-04 cm/cm/°C

Contact Us

Get App

Top