Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

HIPS HH102 USA Monsanto
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Basic performance | Test Condition | Test Method | USA Monsanto/HH102 |
---|---|---|---|
Water absorption rate | JIS K-7209 | 0.03-0.04 % | |
melt mass-flow rate | 200°C 负荷 5kg | JIS K-7210 | 7.5 g/10min |
Mechanical properties | Test Condition | Test Method | USA Monsanto/HH102 |
---|---|---|---|
Impact strength of cantilever beam gap | 3.2mm×12.7mm | JIS K-7110 | 1.4 kg-cm/cm of notch |
elongation at break | JIS K-7113 | 1.8 % | |
tensile strength | JIS K-7113 | 450 kg/cm | |
bending strength | JIS K-7203 | 700 kg/cm | |
Rockwell hardness | JIS K-7202 | M80 R,MScale | |
Rubbing modulus | JIS K-7203 | 3.2 10 |
Electrical performance | Test Condition | Test Method | USA Monsanto/HH102 |
---|---|---|---|
Volume resistivity | ASTM D-257 | >10 Ω.cm |
processability | Test Condition | Test Method | USA Monsanto/HH102 |
---|---|---|---|
Shrinkage rate | ASTM D-955 | 3-6 10 |
physical property | Test Condition | Test Method | USA Monsanto/HH102 |
---|---|---|---|
density | JIS K-7112 | 1.04-1.06 |
Thermal performance | Test Condition | Test Method | USA Monsanto/HH102 |
---|---|---|---|
flammability | UL 94 | HB | |
vicat | JIS K-7206 | 94 °C | |
Heat distortion temperature | 6.4mm×12.7mm纤维强度18.56kg/cm | JIS K-7207 | 82 °C |
Linear coefficient of thermal expansion | ASTM D-696 | 6-8 10 |
Contact Us
Get App
Top