Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TPE G2780C GLS USA
GLS™Dynaflex ™
sheet、parts、Personal care、Profile、Wrapping molding、Transparent or semi trans、Blow molding applications、Consumer product applicat
Coloring、Recyclable、UV resistance、Ozone resistant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | GLS USA/G2780C |
|---|---|---|---|
| Shore hardness | 邵氏A,10秒 | ASTM D2240 | 84 |
| Filling analysis | Test Condition | Test Method | GLS USA/G2780C |
|---|---|---|---|
| Apparent viscosity | 200°C,11200sec^-1 | ASTM D3835 | 22.0 Pa·s |
| physical property | Test Condition | Test Method | GLS USA/G2780C |
|---|---|---|---|
| melt mass-flow rate | 200°C/5.0kg | ASTM D1238 | 16 g/10min |
| Shrinkage rate | MD | ASTM D955 | 0.90-1.5 % |
| melt mass-flow rate | 190°C/2.16kg | ASTM D1238 | 5.0 g/10min |
| elastomer | Test Condition | Test Method | GLS USA/G2780C |
|---|---|---|---|
| elongation | 断裂,23°C | ASTM D412 | 370 % |
| tensile strength | 断裂,23°C | ASTM D412 | 8.27 Mpa |
| compression set | 23°C,22hr | ASTM D395B | 18 % |
| tensile strength | 100%应变,23°C3 | ASTM D412 | 5.79 Mpa |
| 300%应变,23°C4 | ASTM D412 | 7.86 Mpa | |
| tear strength | ASTM D624 | 43.8 kN/m |
Contact Us
Get App
Top