Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC+TPU 55D DSM Additive Manufacturing
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | DSM Additive Manufacturing/55D |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 56 |
| Electrical performance | Test Condition | Test Method | DSM Additive Manufacturing/55D |
|---|---|---|---|
| dielectric constant | 60Hz | ASTM D150 | 4.50 |
| dielectric strength | ASTM D149 | 21 kV/mm |
| Mechanical properties | Test Condition | Test Method | DSM Additive Manufacturing/55D |
|---|---|---|---|
| Taber abraser | 1000Cycles,1000g,H-18转轮 | ASTM D1044 | 7.40 mg |
| tensile strength | 极限 | ASTM D638 | 60.5 MPa |
| 300%应变 | ASTM D638 | 48.0 MPa | |
| elongation | 断裂 | ASTM D638 | 370 % |
| tensile strength | 100%应变 | ASTM D638 | 17.0 MPa |
| Flexural modulus | ASTM D790 | 48.3 MPa | |
| coefficient of friction | 与自身-动态 | ASTM D1894 | 0.81 |
| tensile strength | 50%应变 | ASTM D638 | 12.2 MPa |
| bending strength | 5.0%应变 | ASTM D790 | 2.07 MPa |
| physical property | Test Condition | Test Method | DSM Additive Manufacturing/55D |
|---|---|---|---|
| Water absorption rate | 饱和 | ASTM D570 | 0.90 % |
| density | ASTM D792 | 1.21 g/cm³ | |
| Shrinkage rate | MD：--3 | ASTM D955 | 1.2 % |
| melt mass-flow rate | 224°C/1.2kg | ASTM D1238 | 20 g/10min |
| Shrinkage rate | MD：--2 | ASTM D955 | 0.50to2.0 % |
| elastomer | Test Condition | Test Method | DSM Additive Manufacturing/55D |
|---|---|---|---|
| tear strength | ASTM D624 | 137 kN/m |
| Thermal performance | Test Condition | Test Method | DSM Additive Manufacturing/55D |
|---|---|---|---|
| vicat | ASTM D1525 | 98.0 °C | |
| Linear coefficient of thermal expansion | MD | ASTME831 | 1.4E-04 cm/cm/°C |
Contact Us
Get App
Top