Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Phenolic 1760 Synres-Almoco BV
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodSynres-Almoco BV/1760
Impact strength of simply supported beam without notch注塑ISO 179/1eU6.0to9.0 kJ/m²
Charpy Notched Impact Strength注塑ISO 179/1eA2.0to4.0 kJ/m²
Electrical performanceTest ConditionTest MethodSynres-Almoco BV/1760
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 2
dielectric strengthIEC 60243-120to30 kV/mm
Volume resistivityIEC 600931.0E+12到1.0E+13 ohms·cm
Dissipation Factor100HzIEC 602500.60to0.80
relative permittivity100HzIEC 6025010.012.0
arc resistanceASTM D495PLC 5
relative permittivity1MHzIEC 602504.006.00
Surface ResistivityIEC 600931.0E+10到1.0E+11 ohms
Dissipation Factor1MHzIEC 602500.040to0.060
Mechanical propertiesTest ConditionTest MethodSynres-Almoco BV/1760
bending strength注塑ISO 178100to120 MPa
Flexural modulus注塑ISO 1787000to9000 MPa
compression stressISO 604150to200 MPa
tensile strength 注塑ISO 527-250.0to70.0 MPa
Tensile modulus注塑ISO 527-25000to7000 MPa
flammabilityTest ConditionTest MethodSynres-Almoco BV/1760
Hot filament ignition temperatureIEC 60695-2-13960 °C
UL flame retardant rating1.5mmUL 94V-0
Burning wire flammability indexIEC 60695-2-12960 °C
physical property Test ConditionTest MethodSynres-Almoco BV/1760
Shrinkage rateISO 25770.10to0.20 %
Apparent densityISO 600.60to0.80 g/cm³
Water absorption rate23°C,24hrISO 62<0.50 %
Shrinkage rateMD2ISO 25770.60to0.80 %
densityISO 11831.60to1.75 g/cm³
Thermal performanceTest ConditionTest MethodSynres-Almoco BV/1760
Heat distortion temperature1.8MPa,未退火，HDTISO 75-2/A>200 °C
8.0MPa,未退火，HDTISO 75-2/C160to180 °C
thermal conductivityASTME14610.40to0.60 W/m/K

Contact Us

Get App

Top