Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA46 TS250F6D BK DSM JAPAN
Stanyl® 
Home appliance components、Electronic and electrical
Thermal stability、Flame retardant
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodDSM JAPAN/TS250F6D BK
Charpy Notched Impact Strength23°CISO 179/1eA11 kJ/m²
-30°CISO 179/1eA10 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU60 kJ/m²
Impact strength of cantilever beam gap23°CISO 180/1A11 kJ/m²
-40°CISO 180/1A11 kJ/m²
Impact strength of simply supported beam without notch-30°CISO 179/1eU50 kJ/m²
Mechanical propertiesTest ConditionTest MethodDSM JAPAN/TS250F6D BK
Tensile modulusISO 527-212000 Mpa
Tensile strain断裂ISO 527-22.5 %
Flexural modulusISO 17811000 Mpa
tensile strength 断裂ISO 527-2180 Mpa
Electrical performanceTest ConditionTest MethodDSM JAPAN/TS250F6D BK
relative permittivity100 HzIEC 602504.30
dielectric strengthIEC 60243-130 KV/mm
Volume resistivityIEC 60093> 1.0E+15 ohms·cm
relative permittivity1.00 GHzIEC 602503.60
1 MHzIEC 602504.00
Compared to the Leakage Tracking Index (CTI)IEC 60112 V
flammabilityTest ConditionTest MethodDSM JAPAN/TS250F6D BK
Flammability levelUL 94V-0
physical property Test ConditionTest MethodDSM JAPAN/TS250F6D BK
Water absorption rate平衡, 23°C, 50% RHISO 621.5 %
densityISO 11831.68 g/cm³
Shrinkage rate流量ISO 294-40.40 %
横向流量ISO 294-41.1 %
Thermal performanceTest ConditionTest MethodDSM JAPAN/TS250F6D BK
melting temperatureISO 11357-3295 °C
Heat distortion temperature0.45 MPa, 未退火，HDTISO 75-2/B290 °C
RTI Elec0.67 mmUL 746140 °C
Heat distortion temperature1.8 MPa, 未退火，HDTISO 75-2/A290 °C
Thermal Index - 5000 hrIEC 60216163 °C
Linear coefficient of thermal expansion流动ISO 11359-22.5E-5 cm/cm/°C
横向ISO 11359-25.5E-5 cm/cm/°C

Contact Us

Get App

Top