Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PUR-Ether/MDI Ultralast™ ME930 CHEMTURU USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Supplementary Information | Test Condition | Test Method | CHEMTURU USA/Ultralast™ ME930 |
|---|---|---|---|
| Dynamic Properties | TangentDelta:30°C | 0.0610 | |
| StorageModulus:130°C | 1.01E+08 dynes/cm² | ||
| StorageModulus:30°C | 2.98E+08 dynes/cm² | ||
| TangentDelta:130°C | 0.0570 |
| hardness | Test Condition | Test Method | CHEMTURU USA/Ultralast™ ME930 |
|---|---|---|---|
| Shore hardness | 邵氏A | ASTM D2240 | 92to94 |
| film | Test Condition | Test Method | CHEMTURU USA/Ultralast™ ME930 |
|---|---|---|---|
| Tear resistance of pants | ASTM D1938 | 47.5 N/mm |
| Mechanical properties | Test Condition | Test Method | CHEMTURU USA/Ultralast™ ME930 |
|---|---|---|---|
| Wear resistance - DIN | DIN 53516 | 31.0 mm³ | |
| Flexural modulus | ASTM D790 | 55.7 MPa |
| elastomer | Test Condition | Test Method | CHEMTURU USA/Ultralast™ ME930 |
|---|---|---|---|
| elongation | 断裂 | ASTM D412 | 680 % |
| tear strength | 开裂 | ASTM D470 | 41 kN/m |
| Shore hardness | ASTM D2632 | 56 % | |
| tensile strength | ASTM D412 | 32.8 MPa | |
| compression set | 70°C,22hr | ASTM D395B | 55 % |
| tear strength | 开裂2 | ASTM D470 | 25 kN/m |
| tensile strength | 100%应变 | ASTM D412 | 10.2 MPa |
| physical property | Test Condition | Test Method | CHEMTURU USA/Ultralast™ ME930 |
|---|---|---|---|
| Shrinkage rate | TD:24小时 | ASTM D955 | 1.1 % |
| density | ASTM D792 | 1.12 g/cm³ | |
| Shrinkage rate | MD:24小时 | ASTM D955 | 1.1 % |
| melt mass-flow rate | 210°C/2.16kg | ASTM D1238 | 15to45 g/10min |
| Thermal performance | Test Condition | Test Method | CHEMTURU USA/Ultralast™ ME930 |
|---|---|---|---|
| Glass Transition Temperature | -36.0 °C |
Contact Us
Get App
Top