Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPS G323-BK SABIC INNOVATIVE JAPAN
SABIC®
Gears
Glass fiber reinforced, high rigidity
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | SABIC INNOVATIVE JAPAN/G323-BK |
|---|---|---|---|
| Hot deformation temperature | 1.8Mpa | 260 °C |
| mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE JAPAN/G323-BK |
|---|---|---|---|
| Bending modulus | 19981 Mpa | ||
| Impact strength of cantilever beam gap | Notched23℃ | 59 J/m | |
| tensile strength | Break点 | 138 % |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE JAPAN/G323-BK |
|---|---|---|---|
| Dielectric constant | 4.8 | ||
| Dissipation factor | 0.0017 |
| Physical properties | Test Condition | Test Method | SABIC INNOVATIVE JAPAN/G323-BK |
|---|---|---|---|
| enhance | 65 | ||
| Shrinkage rate | 1-2 E-3 | ||
| Surface resistivity | 1E+13 ohm-cm | ||
| Volume resistivity | 1E+16 ohm-cm |