Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPO HFM4025-BK SABIC INNOVATIVE US
NORYL™
medical care
Glass fiber reinforced、Thermal stability
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | SABIC INNOVATIVE US/HFM4025-BK |
|---|---|---|---|
| Rockwell hardness | M级 | ASTM D785 | 90 |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE US/HFM4025-BK |
|---|---|---|---|
| High Voltage Arc Traceability Rate (HVTR) | HVTR | UL 746 | PLC 4 |
| Volume resistivity | ASTM D257 | 1E+17 ohms·cm | |
| Surface Resistivity | ASTM D257 | 1E+17 ohms | |
| High arc combustion index (HAI) | HAI | UL 746 | PLC 4 |
| dielectric strength | 1.60mm,inAir | ASTM D149 | 25 KV/mm |
| Hot wire ignition (HWI) | HWI | UL 746 | PLC 0 |
| arc resistance | ASTM D495 | PLC 5 | |
| Compared to the Leakage Tracking Index (CTI) | CTI | UL 746 | PLC 4 |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/HFM4025-BK |
|---|---|---|---|
| Poisson's ratio | ASTM D638 | 0.38 | |
| elongation | 屈服 | ASTM D638 | 1.5 % |
| Taber abraser | 1000Cycles,1000g,CS-17转轮 | ASTM D1044 | 35.0 mg |
| tensile strength | 断裂 | ASTM D638 | 127 Mpa |
| bending strength | 屈服,100mm跨距 | ASTM D790 | 159 Mpa |
| coefficient of friction | 与钢-静态 | ASTM D1894 | 0.42 |
| Flexural modulus | 100mm跨距 | ASTM D790 | 9650 Mpa |
| coefficient of friction | 与自身-静态 | ASTM D1894 | 0.44 |
| flammability | Test Condition | Test Method | SABIC INNOVATIVE US/HFM4025-BK |
|---|---|---|---|
| UL flame retardant rating | 2.5mm | UL 94 | 5VA |
| 3.0mm | UL 94 | V-0 | |
| 1.5mm | UL 94 | V-1 |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE US/HFM4025-BK |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D570 | 0.060 % |
| Shrinkage rate | MD:3.20mm | 内部方法 | 0.15 % |
| TD:3.20mm | 内部方法 | 0.25 % |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/HFM4025-BK |
|---|---|---|---|
| Linear coefficient of thermal expansion | TD:-40到95°C | ASTME831 | 3.2E-05 cm/cm/°C |
| Heat distortion temperature | 1.8MPa,未退火,6.40mm，HDT | ASTM D648 | 124 °C |
| Linear coefficient of thermal expansion | MD:-40到95°C | ASTME831 | 2.2E-05 cm/cm/°C |
| RTI Imp | UL 746 | 50.0 °C | |
| RTI | UL 746 | 50.0 °C | |
| RTI Elec | UL 746 | 50.0 °C |
Contact Us
Get App
Top