Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPS K531A1-52Y388 IDEMITSU JAPAN
--
plastic pallet,Automotive Applications
High mobility,High temperature resistan,Filler: Glass mineral,70% filler by weight,70% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Supplementary Information | Test Condition | Test Method | IDEMITSU JAPAN/K531A1-52Y388 |
---|---|---|---|
Flowability2 | 1.00mm,Flowability | Internal Method | 8.20 CM |
hardness | Test Condition | Test Method | IDEMITSU JAPAN/K531A1-52Y388 |
---|---|---|---|
Rockwell hardness | M-Sale | ISO 2039-2 | 97 |
thermal performance | Test Condition | Test Method | IDEMITSU JAPAN/K531A1-52Y388 |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 275 °C |
Linear coefficient of thermal expansion | TD | ISO 11359-2 | 2.4E-05 cm/cm/°C |
MD | ISO 11359-2 | 1.4E-05 cm/cm/°C |
mechanical properties | Test Condition | Test Method | IDEMITSU JAPAN/K531A1-52Y388 |
---|---|---|---|
Bending modulus | ISO 178 | 18700 Mpa | |
bending strength | ISO 178 | 170 Mpa | |
Tensile strain | Break | ISO 527-2 | 0.80 % |
tensile strength | ISO 527-2 | 114 Mpa |
Electrical performance | Test Condition | Test Method | IDEMITSU JAPAN/K531A1-52Y388 |
---|---|---|---|
Dielectric constant | IEC 60250 | 4.70 | |
Dielectric strength | 3.00mm | IEC 60243-1 | 13 KV/mm |
Volume resistivity | ASTM D257 | 1E+16 ohms·cm |
Physical properties | Test Condition | Test Method | IDEMITSU JAPAN/K531A1-52Y388 |
---|---|---|---|
density | ISO 1183 | 1.93 g/cm³ | |
Shrinkage rate | MD | ISO 294-4 | 0.30 % |
TD | ISO 294-4 | 0.40 % | |
Water absorption rate | 23°C,24hr | ISO 62 | >0.020 % |
impact performance | Test Condition | Test Method | IDEMITSU JAPAN/K531A1-52Y388 |
---|---|---|---|
Impact strength of simply supported beam without notch | ISO 179 | 7.7 kJ/m² |
flammability | Test Condition | Test Method | IDEMITSU JAPAN/K531A1-52Y388 |
---|---|---|---|
UL flame retardant rating | 1.5mm | UL 94 | V-0 |