Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC LS1-701 SABIC INNOVATIVE US
LEXAN™
Electronic and electrical accessories,Automotive components
Low temperature resistanc,UV resistance,Thermal stability
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/LS1-701 |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Unannealed,6.40mm | ASTM D648 | 129 °C |
RTI Elec | UL 746 | 130 °C | |
RTI Imp | UL 746 | 125 °C | |
RTI Str | UL 746 | 125 °C |
mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/LS1-701 |
---|---|---|---|
Bending modulus | 50.0mmSpan | ASTM D790 | 2340 Mpa |
bending strength | Yield,50.0mmSpan | ASTM D790 | 96.5 Mpa |
elongation | Break | ASTM D638 | 130 % |
tensile strength | Yield | ASTM D638 | 62.1 Mpa |
Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE US/LS1-701 |
---|---|---|---|
Compared to the anti leakage trace index | CTI | UL 746 | PLC 2 |
High arc combustion index | HAI | UL 746 | PLC 1 |
High voltage arc tracing rate | HVTR | UL 746 | PLC 2 |
Hot wire ignition | HWI | UL 746 | PLC 4 |
Physical properties | Test Condition | Test Method | SABIC INNOVATIVE US/LS1-701 |
---|---|---|---|
melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 18 g/10min |
Outdoor applicability | UL 746C | f1 | |
Shrinkage rate | MD:3.20mm | Internal Method | 0.50-0.70 % |
Water absorption rate | 24hr | ASTM D570 | 0.15 % |
impact performance | Test Condition | Test Method | SABIC INNOVATIVE US/LS1-701 |
---|---|---|---|
Dart impact | 23°C,EnergyatPeakLoad | ASTM D3763 | 62.1 J |
23°C | Internal Method | 169 J | |
Impact strength of cantilever beam gap | ASTM D1822 | 473 kJ/m² |
flammability | Test Condition | Test Method | SABIC INNOVATIVE US/LS1-701 |
---|---|---|---|
UL flame retardant rating | 1.5mm | UL 94 | HB |
optical performance | Test Condition | Test Method | SABIC INNOVATIVE US/LS1-701 |
---|---|---|---|
transmissivity | 2540μm | ASTM D1003 | 88.0 % |