Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP Copolymer Retpol® 9034 HS POLYPACIFIC AUSTRALIA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | POLYPACIFIC AUSTRALIA/Retpol® 9034 HS |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 45 J/m |
| Suspended wall beam without notch impact strength | 23°C | ASTM D256 | 640 J/m |
| tensile strength | 23°C | ASTM D638 | 22 MPa |
| Flexural modulus | 23°C | ASTM D790 | 980 MPa |
| elongation at break | 23°C | ASTM D638 | 160 % |
| Flame retardant performance | Test Condition | Test Method | POLYPACIFIC AUSTRALIA/Retpol® 9034 HS |
|---|---|---|---|
| UL flame retardant rating | UL -94 | V-0 1.50mm |
| physical property | Test Condition | Test Method | POLYPACIFIC AUSTRALIA/Retpol® 9034 HS |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D995 | 1.30-1.80 % |
| density | ASTM D792 | 1.07 g/cm³ | |
| melt mass-flow rate | 230℃/2.16Kg | ASTM D1238 | 20 g/10min |
| Thermal performance | Test Condition | Test Method | POLYPACIFIC AUSTRALIA/Retpol® 9034 HS |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD | ASTM D696 | 0.000080 cm/cm／°C |
| Heat distortion temperature | 0.45MPa未退火，HDT | ASTM D648 | 80 °C |
Contact Us
Get App
Top