Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC EM1210 78016 SABIC INNOVATIVE JAPAN
LEXAN™
Automotive interior parts、Suitable for automotive i
High impact resistance、Thermal stability、wear resistant、transparent
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE JAPAN/EM1210 78016 |
|---|---|---|---|
| bending strength | 屈服 | ASTM D-790 | 11800 psi |
| Impact strength of cantilever beam gap | 缺口，73F | ASTM D-256 | 13.0 ft-lb/in |
| elongation | 断裂 | ASTM D-638 | 110.0 % |
| Instrumented impact | @ 峰值, 73F（@ 峰值, -22F） | ASTM D1646 | 540（580） in-lbs |
| Flexural modulus | --- | ASTM D-790 | 295000 psi |
| Impact strength of cantilever beam gap | 缺口，-22F | ASTM D-256 | 13.0 ft-lb/in |
| tensile strength | 屈服 | ASTM D-638 | 8300 psi |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE JAPAN/EM1210 78016 |
|---|---|---|---|
| melt mass-flow rate | 标称, 300C/1.2 kgf (O) | ASTM D-1238 | 13.0 g/10 min |
| Water absorption rate | 24 小时 @ 73F | ASTM D-570 | 0.160 % |
| Shrinkage rate | flow, 0.125" | ASTM D-955 | 5-7 in/in E-3 |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE JAPAN/EM1210 78016 |
|---|---|---|---|
| Linear coefficient of thermal expansion | flow, -40F ~ 200F | ASTM E-831 | 3E-05 in/in-F |
| Heat distortion temperature | 未退火，264 psi, 0.250"，HDT | ASTM D-648 | 262 deg F |
| 未退火，66 psi, 0.250"，HDT | ASTM D-648 | 275 deg F |
Contact Us
Get App
Top