Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA6 TS-V0 EMS-CHEMIE SWITZERLAND
Grilon®
Automotive Applications
Glass fiber reinforced,Thermal stability
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/TS-V0 |
|---|---|---|---|
| Extreme Oxygen Index | ISO 4589-2 | 干燥|35 | |
| Flammability level | UL 94 | 干燥|V-0 |
| thermal performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/TS-V0 |
|---|---|---|---|
| Continuous use temperature | --3 | ISO 2578 | 干燥|100 -120 °C |
| --4 | Internal Method | 干燥|200 °C | |
| Hot deformation temperature | 1.8 MPa, Unannealed | ISO 75-2/C | 干燥|70 °C |
| 0.45 MPa, Unannealed | ISO 75-2/A | 干燥|210 °C | |
| Linear coefficient of thermal expansion | TD | ISO 11359-2 | 干燥|9.0E-5 cm/cm/°C |
| MD | ISO 11359-2 | 干燥|7.0E-5 cm/cm/°C | |
| Melting temperature | ISO 11357-3 | 干燥|260 °C |
| mechanical properties | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/TS-V0 |
|---|---|---|---|
| Charpy Notched Impact Strength | -30°C | ISO 179/1eA | 调节后|3.0 kJ/m² |
| 23°C | ISO 179/1eA | 调节后|15 kJ/m² | |
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 调节后|- kJ/m² |
| 23°C | ISO 179/1eU | 调节后|100 kJ/m² | |
| Nominal tensile fracture strain | ISO 527-2 | 调节后|>50 % | |
| Tensile modulus | ISO 527-2 | 调节后|1600 Mpa | |
| Tensile strain | Break | ISO 527-2 | 调节后|15 % |
| tensile strength | Yield | 调节后|50 Mpa | |
| Break | ISO 527-2 | 调节后|50 Mpa |
| Electrical performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/TS-V0 |
|---|---|---|---|
| Compared to the anti leakage trace index | IEC 60112 | V | |
| Dielectric strength | IEC 60243-1 | 调节后|26 KV/mm | |
| Dissipation factor | 1 MHz | 调节后|0.070 | |
| 100 Hz | 调节后|0.15 | ||
| Relative permittivity | 1 MHz | 调节后|4.00 | |
| 100 Hz | 调节后|8.00 | ||
| Surface resistivity | IEC 60093 | 调节后|1.0E+10 ohms | |
| Volume resistivity | IEC 60093 | 调节后|1.0E+11 ohms·cm |
| Physical properties | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/TS-V0 |
|---|---|---|---|
| Shrinkage rate | MD | ISO 294-4 | 干燥|0.70 % |
| TD | ISO 294-4 | 干燥|0.80 % | |
| Water absorption rate | Saturation, 23°C | ISO 62 | 干燥|8.0 % |
| Equilibrium, 23°C, 50% RH | ISO 62 | 干燥|2.5 % |