Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA DuraForm® GF 3D Systems
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest Method3D Systems/DuraForm® GF
Impact strength of cantilever beam gap23°CASTM D25641 J/m
Suspended wall beam without notch impact strength23°CASTM D256120 J/m
Dart impactASTM D54204.50 J
hardnessTest ConditionTest Method3D Systems/DuraForm® GF
Shore hardness邵氏DASTM D224077
Electrical performanceTest ConditionTest Method3D Systems/DuraForm® GF
Dissipation Factor1kHzASTM D1500.18
Volume resistivityASTM D2573.2E+11 ohms·cm
dielectric strengthASTM D1498.7 kV/mm
dielectric constant1kHzASTM D1506.27
Surface ResistivityASTM D2573.2E+11 ohms
Mechanical propertiesTest ConditionTest Method3D Systems/DuraForm® GF
elongation断裂ASTM D6381.4 %
屈服ASTM D6381.4 %
Tensile modulusASTM D6384070 MPa
tensile strength 断裂ASTM D63826.0 MPa
Flexural modulusASTM D7903110 MPa
bending strength断裂ASTM D79037.0 MPa
tensile strength 屈服ASTM D63827.0 MPa
flammabilityTest ConditionTest Method3D Systems/DuraForm® GF
UL flame retardant ratingUL 94HB
physical property Test ConditionTest Method3D Systems/DuraForm® GF
Water absorption rate24hrASTM D5700.22 %
densityASTM D7921.49 g/cm³
Thermal performanceTest ConditionTest Method3D Systems/DuraForm® GF
Heat distortion temperature1.8MPa,未退火，HDTASTM D648134 °C
0.45MPa,未退火，HDTASTM D648179 °C
Specific heat capacityASTME12691090 J/kg/°C
Linear coefficient of thermal expansionMD：0到50°CASTME8318.3E-05 cm/cm/°C
thermal conductivityASTME12250.47 W/m/K
Linear coefficient of thermal expansionMD：85到145°CASTME8311.8E-04 cm/cm/°C

Contact Us

Get App

Top