Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEEK PEEK Bada AG
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Bada AG/PEEK |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 7.5 kJ/m² |
| Electrical performance | Test Condition | Test Method | Bada AG/PEEK |
|---|---|---|---|
| Surface Resistivity | 1.00mm | IEC 60093 | >1.0E+15 ohms |
| Volume resistivity | 1.00mm | IEC 60093 | >1.0E+15 ohms·cm |
| Mechanical properties | Test Condition | Test Method | Bada AG/PEEK |
|---|---|---|---|
| tensile strength | 屈服,23°C | ISO 527-2/50 | 95.0 MPa |
| Tensile strain | 屈服,50°C | ISO 527-2/23 | 4.7 % |
| bending strength | 23°C,4.00mm | ISO 178 | 115 MPa |
| Tensile modulus | 23°C | ISO 527-2/1 | 3800 MPa |
| flammability | Test Condition | Test Method | Bada AG/PEEK |
|---|---|---|---|
| Burning wire flammability index | 1.6mm | IEC 60695-2-12 | 960 °C |
| 0.75mm | IEC 60695-2-12 | 960 °C | |
| UL flame retardant rating | 1.6mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | Bada AG/PEEK |
|---|---|---|---|
| density | 23°C | ISO 1183 | 1.30 g/cm³ |
| Thermal performance | Test Condition | Test Method | Bada AG/PEEK |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火,4.00mm，HDT | ISO 75-2/A | 155 °C |
| melting temperature | ISO 3146 | 340 °C |
Contact Us
Get App
Top