PC 8035 901510 PC vs. - Plastic Material Properties Comparison Chart at Plas.com

Material Selector

All

Plastic Materials Additives Masterbatch Material Selector Price Index Trade Data Plastic News About Us

Material Comparison

Add Comparison Model

Select Products for Comparison (1/4)

Highlight Differences

Hide Same

Product Name / Manufacturer / Model

Grade

Reference Price

PC COVESTRO SHANGHAI 8035 901510

Flame retardant enhanced grade

US$ 3,380 / MT

FOB Shanghai port, China

Electrical performance	Test Condition	Test Method	COVESTRO SHANGHAI/8035 901510
Dissipation factor	23°C,1MHz	IEC 60250	9E-03
Volume resistivity	23°C	IEC 60093	1E+16 ohms·cm
Surface resistivity		IEC 60093	1E+16 ohms
Relative permittivity	23°C,100Hz	IEC 60250	3.50
Dissipation factor	23°C,100Hz	IEC 60250	1.5E-03
Dielectric strength	23°C,1.00mm	IEC 60243-1	36 KV/mm
Relative permittivity	23°C,1MHz	IEC 60250	3.50
mechanical properties	Test Condition	Test Method	COVESTRO SHANGHAI/8035 901510
Tensile creep modulus	1hr	ISO 899-1	4700 Mpa
bending strength	23°C	ISO 178	105 Mpa
Bending strain	23°C	ISO 178	4.5 %
tensile strength	Yield,23°C	ISO 527-2/50	59.0 Mpa
bending strength	3.5%Strain,23°C	ISO 178	100 Mpa
Tensile creep modulus	1000hr	ISO 899-1	3900 Mpa
Tensile strain	Yield,23°C	ISO 527-2/50	2.5 %
Tensile strain		Break,23°C	ISO 527-2/5	3.5 %
tensile strength	Break,23°C	ISO 527-2/5	55.0 Mpa
Bending modulus	23°C	ISO 178	4700 Mpa
Tensile modulus	23°C	ISO 527-2/1	5100 Mpa
flammability	Test Condition	Test Method	COVESTRO SHANGHAI/8035 901510
Burning wire flammability index	1.5mm	IEC 60695-2-12	960 °C
Extreme Oxygen Index		ISO 4589-2	37 %
FlashIgnitionTemperature		ASTM D1929	470 °C
ApplicationofFlamefromSmallBurner MethodKandF	2.00mm	DIN 53438-1,-3	K1.F1
Needle flame test	MethodF:1.50mm	IEC 60695-11-5	2.0 min
Hot filament ignition temperature	0.75mm	IEC 60695-2-13	875 °C
UL flame retardant rating	1.5mm	UL 94	V-1
Needle flame test	MethodF:2.00mm	IEC 60695-11-5	2.0 min
Burning wire flammability index	0.75mm	IEC 60695-2-12	960 °C
Burning rate - US-FMVSS	>1.00mm	ISO 3795	passed
Hot filament ignition temperature	3.0mm	IEC 60695-2-13	875 °C
SelfIgnition		ASTM D1929	550 °C
Needle flame test	MethodF:3.00mm	IEC 60695-11-5	2.0 min
Needle flame test		MethodK:3.00mm	IEC 60695-11-5	2.0 min
Burning wire flammability index	3.0mm	IEC 60695-2-12	960 °C
Needle flame test	MethodK:2.00mm	IEC 60695-11-5	1.0 min
Needle flame test		MethodK:1.50mm	IEC 60695-11-5	1.0 min
Hot filament ignition temperature	1.5mm	IEC 60695-2-13	875 °C
impact performance	Test Condition	Test Method	COVESTRO SHANGHAI/8035 901510
Impact strength of cantilever beam gap	23°C,CompleteBreak	ISO 7391	8.0 kJ/m²
Charpy Notched Impact Strength	23°C,CompleteBreak	ISO 7391	8.0 kJ/m²
Impact strength of simply supported beam without notch	23°C,Complete Break	ISO 179/1eU	40 kJ/m²
Impact strength of simply supported beam without notch		-30°C,Complete Break	ISO 179/1eU	45 kJ/m²
Multi axis Instrumented Impact Energy	23°C	ISO 6603-2	5.00 J
Multi axis Instrumented Peak Impact Force	23°C	ISO 6603-2	1300 N
Multi axis Instrumented Peak Impact Force		-30°C	ISO 6603-2	800 N
Multi axis Instrumented Impact Energy	-30°C	ISO 6603-2	5.00 J
Impact strength of simply supported beam without notch	-60°C,CompleteBreak	ISO 179/1eU	45 kJ/m²
hardness	Test Condition	Test Method	COVESTRO SHANGHAI/8035 901510
Ball Pressure Test		ISO 2039-1	149 Mpa
Physical properties	Test Condition	Test Method	COVESTRO SHANGHAI/8035 901510
melt mass-flow rate	300°C/1.2kg	ISO 1133	5.0 g/10min
Shrinkage rate	MD	ISO 2577	0.25-0.40 %
Shrinkage rate		TD:2.00mm3	ISO 294-4	0.35 %
Apparent density		ISO 60	0.69 g/cm³
Shrinkage rate	MD:2.00mm3	ISO 294-4	0.50 %
Shrinkage rate		TD	ISO 2577	0.25-0.40 %
density	23°C	ISO 1183	1.42 g/cm³
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.10 %
Water absorption rate		Saturation,23°C	ISO 62	0.22 %
Melt Volume Flow Rate (MVR)	300°C/1.2kg	ISO 1133	4.00 cm3/10min
Supplementary Information	Test Condition	Test Method	COVESTRO SHANGHAI/8035 901510
Electrolytic corrosion	23°C	IEC 60426	A1
thermal performance	Test Condition	Test Method	COVESTRO SHANGHAI/8035 901510
RTI Imp	1.5mm	UL 746	115 °C
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	135 °C
Vicat softening temperature	--	ISO 306/B50	147 °C
Linear coefficient of thermal expansion	TD：23to55°C	ISO 11359-2	5.5E-05 cm/cm/°C
RTI Str	1.5mm	UL 746	125 °C
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	141 °C
Vicat softening temperature	--	ISO 306/B120	148 °C
thermal conductivity	23°C	ISO 8302	0.24 W/m/K
RTI Elec	1.5mm	UL 746	125 °C
Ball Pressure Test	137°C	IEC 60695-10-2	Pass
Linear coefficient of thermal expansion	MD：23to55°C	ISO 11359-2	3.5E-05 cm/cm/°C

Supplier Join

Get App

Top

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index