Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM N2640Z2 BASF GERMANY
Ultraform®
Fasteners,Buckle,button
High impact,Ultral&reg
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Electrical performance | Test Condition | Test Method | BASF GERMANY/N2640Z2 |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 1E+14 ohm·cm | |
| dielectric constant | 1E+6HZ，73℉ | IEC 60250 | 4.00 |
| Volume resistivity | IEC 60093 | 1E+14 ohms |
| Mechanical properties | Test Condition | Test Method | BASF GERMANY/N2640Z2 |
|---|---|---|---|
| Tensile creep modulus | 1000h | ISO 899-1 | 152000 psi |
| Impact strength of simply supported beam without notch | 73℉ | ISO 179/1eA | No Break ft·lb/in |
| Tensile stress | 73℉ | ISO 527-1 | 7250 psi |
| Tensile strain | 73℉，屈服 | ISO 527-1 | 12 % |
| Charpy Notched Impact Strength | -22℉ | ISO 179 | 3.09 ft·lb/in |
| Impact strength of simply supported beam without notch | -22℉ | ISO 179 | 109 ft·lb/in |
| Tensile modulus | 73℉ | ISO 527-1 | 290000 psi |
| Charpy Notched Impact Strength | 73℉ | ISO 179 | 5.23 ft·lb/in |
| processability | Test Condition | Test Method | BASF GERMANY/N2640Z2 |
|---|---|---|---|
| Temperature | 140-176 ℉ | ||
| process temperature | 374-419 ℉ |
| physical property | Test Condition | Test Method | BASF GERMANY/N2640Z2 |
|---|---|---|---|
| Water absorption rate | 23C/50RH | ISO 62 | 0.2 % |
| density | ISO 1183 | 1.37 g/cm |
| Thermal performance | Test Condition | Test Method | BASF GERMANY/N2640Z2 |
|---|---|---|---|
| Heat distortion temperature | 1.80MPa，HDT | ISO 75A-1 | 185 ℉ |
| UL flame retardant rating | UL 94 | HB |
Contact Us
Get App
Top