Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA6 UNITIKA Nylon 6 CX-2500 UNITIKA JAPAN
--
Parts under the hood of automobiles, electrical enclosures, automotive electronics, construction applications, and automotive applications
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | UNITIKA JAPAN/UNITIKA Nylon 6 CX-2500 |
|---|---|---|---|
| Hot deformation temperature | 0.45MPa,Unannealed | °C | 100 85.0 |
| 1.8MPa,Unannealed | °C | 90.0 70.0 | |
| Linear coefficient of thermal expansion | MD | cm/cm/°C | 7.7E-05 7.7E-05 |
| mechanical properties | Test Condition | Test Method | UNITIKA JAPAN/UNITIKA Nylon 6 CX-2500 |
|---|---|---|---|
| Bending modulus | MPa | 2900 2600 | |
| bending strength | MPa | 126 113 | |
| Tensile modulus | MPa | 3000 2700 | |
| Tensile strain | Break | % | 60 60 |
| Yield | % | 6.0 6.0 | |
| tensile strength | Break | MPa | 90.0 67.0 |
| Electrical performance | Test Condition | Test Method | UNITIKA JAPAN/UNITIKA Nylon 6 CX-2500 |
|---|---|---|---|
| Dielectric constant | 1MHz | 3.30 -- | |
| Dielectric strength | 1.00mm | kV/mm | 33 -- |
| Dissipation factor | 1MHz | 0.060 -- | |
| Volume resistivity | ohms·cm | 1E+15 -- |
| Physical properties | Test Condition | Test Method | UNITIKA JAPAN/UNITIKA Nylon 6 CX-2500 |
|---|---|---|---|
| density | g/cm³ | 1.11 1.11 | |
| Shrinkage rate | TD:3.20mm | % | 1.3 1.3 |
| MD:3.20mm | % | 0.70 0.70 | |
| Water absorption rate | 23°C,24hr | % | 0.70 0.70 |
| Equilibrium,23°C,50%RH | % | 1.3 1.3 |
| impact performance | Test Condition | Test Method | UNITIKA JAPAN/UNITIKA Nylon 6 CX-2500 |
|---|---|---|---|
| Charpy Notched Impact Strength | kJ/m² | 2.0 2.0 | |
| Impact strength of simply supported beam without notch | kJ/m² | 80 80 |
| flammability | Test Condition | Test Method | UNITIKA JAPAN/UNITIKA Nylon 6 CX-2500 |
|---|---|---|---|
| UL flame retardant rating | 0.75mm | V-2 V-2 |