Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 SLOVAMID® 6 GF 15 LS PLASTCOM SLOVAKIA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | PLASTCOM SLOVAKIA/SLOVAMID® 6 GF 15 LS |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179 | 4.0 kJ/m² |
| Impact strength of simply supported beam without notch | -20°C | ISO 179 | 20 kJ/m² |
| Charpy Notched Impact Strength | -20°C | ISO 179 | 3.0 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179 | 25 kJ/m² |
| Mechanical properties | Test Condition | Test Method | PLASTCOM SLOVAKIA/SLOVAMID® 6 GF 15 LS |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 5700 MPa | |
| Tensile strain | 屈服 | ISO 527-2 | 4.0 % |
| tensile strength | 屈服 | ISO 527-2 | 95.0 MPa |
| Flexural modulus | ISO 178 | 4800 MPa | |
| bending strength | ISO 178 | 150 MPa |
| flammability | Test Condition | Test Method | PLASTCOM SLOVAKIA/SLOVAMID® 6 GF 15 LS |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB | |
| Hot filament ignition temperature | IEC 60695-2-13 | 650 °C |
| physical property | Test Condition | Test Method | PLASTCOM SLOVAKIA/SLOVAMID® 6 GF 15 LS |
|---|---|---|---|
| Shrinkage rate | MD | STM640808 | 0.67 % |
| density | ISO 1183 | 1.20 g/cm³ | |
| water content | ISO 960 | 0.15 % | |
| Shrinkage rate | TD | STM640808 | 1.6 % |
| melt mass-flow rate | 230°C/2.16kg | ISO 1133 | 3.0 g/10min |
| Thermal performance | Test Condition | Test Method | PLASTCOM SLOVAKIA/SLOVAMID® 6 GF 15 LS |
|---|---|---|---|
| vicat | ISO 306/B | 200 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 200 °C |
| melting temperature | ISO 3146 | 220 °C |
Contact Us
Get App
Top