Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 G4000HS1L NC01 INVISTA USA
--
--
Glass fiber reinforced material 40%, filler, good dimensional stability, high tensile strength, thermal stability, and good demolding performance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | INVISTA USA/G4000HS1L NC01 |
|---|---|---|---|
| Charpy Notched Impact Strength | -40℃ | ISO 179 | 10 kJ/m² |
| Impact strength of simply supported beam without notch | 23℃ | ISO 180 | 13 kJ/m² |
| Thermal performance | 热变形温度 | ISO 527-2/B | 260 0.45 MPa, 未退火 |
| melting temperature | ISO 11357-3 | 262 ℃ | |
| Tensile modulus | ISO 527-2 | 12300 MPa | |
| tensile strength | 断裂 | ISO 527-2 | 225 MPa |
| Tensile strain | 断裂 | ISO 527-2 | 3.0 % |
| Flexural modulus | ISO 178 | 10300 MPa | |
| Thermal performance | 1.8 MPa, 未退火 | ISO 527-2/A | 250 ℃ |
| bending strength | ISO 178 | 320 MPa | |
| Charpy Notched Impact Strength | 23℃ | 13 |
| physical property | Test Condition | Test Method | INVISTA USA/G4000HS1L NC01 |
|---|---|---|---|
| Water absorption rate | 平衡, 23°C, 50% RH | 1.1 | |
| 23℃, 24 hr | ISO 62 | 0.70 % | |
| Shrinkage rate | TD : 2.00 mm | ISO 294-4 | 0.85to0.95 % |
| density | ISO 1183 | 1.47 g/cm³ | |
| Shrinkage rate | MD : 2.00 mm | 0.35到0.45 | % |
Contact Us
Get App
Top