Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 B3WG10 BASF GERMANY
Ultramid®
Industrial components
Thermal stability、High mobility、High rigidity、Heat aging
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | BASF GERMANY/B3WG10 |
|---|---|---|---|
| Charpy Notched Impact Strength | +23℃，干/湿 | 100/110 KJ/m | |
| Tensile creep modulus | 1000h，湿 | 7400 Mpa | |
| Fracture stress (V=50mm/min) | 干/湿 | 235/160 Mpa | |
| Charpy Notched Impact Strength | 30℃，干 | 90 KJ/m | |
| Flexural modulus | 干/湿 | 15000/9000 Mpa | |
| ball-indentation hardness | 干/湿 | 280/210 Mpa | |
| elongation | ≤0.5%, +23℃，湿 | 7400 Mpa | |
| Charpy Notched Impact Strength | 30℃，干/湿 | 16 KJ/m | |
| Tensile yield stress (V=50mm/min) | 干/湿 | 235/160 Mpa | |
| Impact Strength | +23℃，干/湿 | 3/10 J | |
| Charpy Notched Impact Strength | 干/湿 | 22/30 KJ/m | |
| Tensile modulus | 干/湿 | 16000/11000 Mpa | |
| Impact strength of cantilever beam gap | +23℃，干/湿 | 20/24 KJ/m | |
| bending strength | 干/湿 | 320/240 Mpa | |
| elongation at break | 干/湿，V=50mm/min | 3/5.5 % |
| Electrical performance | Test Condition | Test Method | BASF GERMANY/B3WG10 |
|---|---|---|---|
| dielectric constant | 1MHz，干/湿 | 4.2/6.1 | |
| Compared to the Leakage Traceability Index (CTI) | 干/湿 | CTI 450 | |
| dielectric strength | K20/P50，干/湿 | 90/40 KV/mm | |
| loss angle | 1MHz，干/湿 | 0.014/0.14 | |
| Surface Resistivity | 干/湿 | 10 Ω | |
| Volume resistivity | 干/湿 | 10 Ω.cm |
| other | Test Condition | Test Method | BASF GERMANY/B3WG10 |
|---|---|---|---|
| characteristic | 高刚性 良好的耐热老化性能 | ||
| purpose | 工业领域 |
| Physical properties | Test Condition | Test Method | BASF GERMANY/B3WG10 |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.3 % | |
| density | ASTM D792/ISO 1183 | 1.55 |
| Thermal performance | Test Condition | Test Method | BASF GERMANY/B3WG10 |
|---|---|---|---|
| TEMPERATURE | 在20000h/5000h，后拉伸强度下降50%时 | 130/160 °C | |
| Heat distortion temperature | 1.8MPa负荷，干态，HDT | 215 °C | |
| thermal conductivity | 干态 | 0.32 W/(m.K) | |
| Linear coefficient of thermal expansion | （23-80）℃，干态 | 1-1.5/5-6 | |
| maximum service temperature | 200 °C | ||
| Heat distortion temperature | 0.45MPa负荷,干态，HDT | 220 °C | |
| specific heat | 干态 | 1.3 J/(g.K) |
Contact Us
Get App
Top