Impact resistance	Test Condition	Test Method	BASF GERMANY/C3U BK
Charpy Notched Impact Strength	23°C	ISO 179	9.0 kJ/m²
Impact strength of cantilever beam gap	-40°C	ASTM D256	32 J/m
Impact strength of cantilever beam gap		23°C	ASTM D256	43 J/m
Charpy Notched Impact Strength	-30°C	ISO 179	4.0 kJ/m²
Impact strength of cantilever beam gap	23°C	ISO 180	4.5 kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179	80 kJ/m²

hardness	Test Condition	Test Method	BASF GERMANY/C3U BK
ball-indentation hardness		ISO 2039-1	100 Mpa

Mechanical properties	Test Condition	Test Method	BASF GERMANY/C3U BK
tensile strength	屈服,23°C	ISO 527-2	75.0 Mpa
Tensile strain	屈服,23°C	ISO 527-2	4.0 %
Flexural modulus	23°C	ISO 178	3000 Mpa
Tensile modulus	23°C	ISO 527-2	3500 Mpa
elongation	屈服,23°C	ASTM D638	5.0 %
tensile strength	屈服,23°C	ASTM D638	83.0 Mpa
Nominal tensile fracture strain	23°C	ISO 527-2	6.0 %
Flexural modulus	23°C	ASTM D790	3000 Mpa
elongation	断裂,23°C	ASTM D638	50 %

Electrical performance	Test Condition	Test Method	BASF GERMANY/C3U BK
Compared to the Leakage Tracking Index (CTI)		IEC 60112	PLC 0
dielectric strength		IEC 60243-1	32 KV/mm
Volume resistivity		IEC 60093	1E+13 ohms·cm
Volume resistivity		1.50mm	ASTM D257	1E+13 ohms·cm
dielectric constant	1MHz	IEC 60250	3.60
Dissipation Factor	1MHz	IEC 60250	0.020

flammability	Test Condition	Test Method	BASF GERMANY/C3U BK
UL flame retardant rating	0.75mm	UL 94	V-0
		3.0mm	UL 94	V-0
		0.38mm	UL 94	V-0
		1.5mm	UL 94	V-0

physical property	Test Condition	Test Method	BASF GERMANY/C3U BK
Shrinkage rate	MD：3.18mm		0.80 %
Water absorption rate	饱和	ASTM D570	8.5 %
		平衡,50%RH	ASTM D570	2.9 %
		平衡,23°C,50%RH	ISO 62	2.9 %
		饱和,23°C	ISO 62	8.5 %
density		ASTM D792	1.16 g/cm³
density			ISO 1183	1.16 g/cm³
Melt volume flow rate	275°C/5.0kg	ISO 1133	140 cm3/10min

Thermal performance	Test Condition	Test Method	BASF GERMANY/C3U BK
Heat distortion temperature	1.8MPa,未退火，HDT	ASTM D648	91.0 °C
RTI Str	0.75mm	UL 746	115 °C
RTI Elec	0.38mm	UL 746	110 °C
RTI Imp	1.5mm	UL 746	105 °C
melting temperature		ASTM D3418	243 °C
RTI Elec	3.0mm	UL 746	120 °C
RTI Imp	0.38mm	UL 746	65.0 °C
RTI Imp		3.0mm	UL 746	105 °C
melting temperature		ISO 3146	243 °C
RTI Elec	0.75mm	UL 746	120 °C
RTI Imp	0.75mm	UL 746	105 °C
Heat distortion temperature	0.45MPa,未退火，HDT	ASTM D648	224 °C
Linear coefficient of thermal expansion	MD		8E-05 cm/cm/°C
Heat distortion temperature	1.8MPa,未退火，HDT	ISO 75-2/A	70.0 °C
RTI Str	0.38mm	UL 746	65.0 °C
		1.5mm	UL 746	120 °C
		3.0mm	UL 746	120 °C
RTI Elec	1.5mm	UL 746	120 °C
Linear coefficient of thermal expansion	MD	ASTME831	4E-05 cm/cm/°C
Linear coefficient of thermal expansion		TD		9E-05 cm/cm/°C

Get App

Top