Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS NILSAN S MR K17V Taro Plast S.p.A.
--
--
Filler, glass fiber reinforced material, 17%, filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodTaro Plast S.p.A./NILSAN S MR K17V
Impact strength of cantilever beam gap23°CASTM D25660 J/m
Supplementary InformationTest ConditionTest MethodTaro Plast S.p.A./NILSAN S MR K17V
ReinforcementContent750°CISO 345117 %
Mechanical propertiesTest ConditionTest MethodTaro Plast S.p.A./NILSAN S MR K17V
Flexural modulusISO 1785200 MPa
Tensile strain断裂ISO 527-2/502.0 %
Tensile modulusISO 527-2/15600 MPa
tensile strength 断裂ISO 527-2/5078.0 MPa
Electrical performanceTest ConditionTest MethodTaro Plast S.p.A./NILSAN S MR K17V
Volume resistivityIEC 600931E+15 ohms·cm
flammabilityTest ConditionTest MethodTaro Plast S.p.A./NILSAN S MR K17V
Hot filament ignition temperatureIEC 60695-2-13550 °C
physical property Test ConditionTest MethodTaro Plast S.p.A./NILSAN S MR K17V
Shrinkage rateMD内部方法0.10to0.30 %
Water absorption rate23°C,24hrISO 620.10 %
饱和,23°CISO 620.20 %
Shrinkage rateTD内部方法0.30to0.80 %
densityISO 11831.17 g/cm³
melt mass-flow rate220°C/10.0kgISO 113310 g/10min
Thermal performanceTest ConditionTest MethodTaro Plast S.p.A./NILSAN S MR K17V
Continuous use temperatureIEC 6021675.0 °C
Linear coefficient of thermal expansionMD:-30到30°CISO 11359-24.5E-05 cm/cm/°C
vicat--ISO 306/A50108 °C
Heat distortion temperature1.8MPa,未退火,HDTISO 75-2/A96.0 °C
vicat--ISO 306/B50104 °C
ball-indentation hardness100°CIEC 60695-10-2通过

Contact Us

Get App

Top