Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS+PBT Infino GP-3200G LOTTE KOREA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Test Condition | Test Method | LOTTE KOREA/Infino GP-3200G | |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 112 |
| UL flame retardant rating | 3.0mm | UL 94 | HB |
| tensile strength | 断裂 | ISO 527-2/50 | 90.0 MPa |
| Tensile modulus | ISO 527-2/50 | 5000 MPa | |
| tensile strength | 屈服 | ASTM D638 | 78.5 MPa |
| elongation | 断裂 | ASTM D638 | 3.2 % |
| Tensile modulus | ASTM D638 | 4900 MPa | |
| melt mass-flow rate | 250°C/5.0kg | ISO 1133 | 33 g/10min |
| vicat | -- | ISO 306/B50 | 129133 °C |
| density | ISO 1183 | 1.32 g/cm³ | |
| Tensile strain | 断裂 | ISO 527-2/50 | 3.6 % |
| melt mass-flow rate | 250°C/5.0kg | ASTM D1238 | 33 g/10min |
| bending strength | ISO 178 | 130 MPa | |
| Impact strength of cantilever beam gap | 23°C,6.35mm | ASTM D256 | 65 J/m |
| density | ASTM D792 | 1.32 g/cm³ | |
| Flexural modulus | ASTM D790 | 4900 MPa | |
| Heat distortion temperature | 1.8MPa,未退火,6.40mm，HDT | ASTM D648 | 145 °C |
| 1.8MPa,Unannealed,4.00mm，HDT | ISO 75-2/A | 127 °C | |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 7.5 kJ/m² |
| Rockwell hardness | R级 | ISO 2039-2 | 110 |
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 65 J/m |
| vicat | -- | ISO 306/B120 | 131137 °C |
| Shrinkage rate | MD：3.20mm | ASTM D955 | 0.40to0.90 % |
| Water absorption rate | 平衡,23°C | ASTM D570 | 0.080 % |
| Heat distortion temperature | 0.45MPa,Unannealed,4.00mm，HDT | ISO 75-2/B | 198 °C |
| UL flame retardant rating | 1.5mm | UL 94 | HB |
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 8.3 kJ/m² |
| tensile strength | 屈服 | ISO 527-2/50 | 91.0 MPa |
| 断裂 | ASTM D638 | 78.5 MPa | |
| ash content | -- | ISO 3451 | 19 % |
| Flexural modulus | ISO 178 | 5000 MPa | |
| Heat distortion temperature | 0.45MPa,未退火,6.40mm，HDT | ASTM D648 | 205 °C |
| ash content | -- | ASTM D5630 | 19 % |
| bending strength | ASTM D790 | 118 MPa |
Contact Us
Get App
Top