Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS 5000S TAIDA TAIWAN
TAITALAC®
Charger casing,Industrial applications,rope,Bag,Monofilament,For audio tapes,clock,Household products,Recording tape case, etc,Electrical appliances,Household goods,Audiotape
High rigidity,antioxidant,Good tensile strength,High steel type,Injection molding,High rigidity and impact
UL
TDS
TDS_ISO
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | TAIDA TAIWAN/5000S |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,6.35mm | ASTM D256 | 150 J/m |
| 23°C,3.18mm | ASTM D256 | 160 J/m |
| hardness | Test Condition | Test Method | TAIDA TAIWAN/5000S |
|---|---|---|---|
| Rockwell hardness | R计秤,23°C | ASTM D785 | 119 |
| Basic performance | Test Condition | Test Method | TAIDA TAIWAN/5000S |
|---|---|---|---|
| Water absorption rate | ASTM D-570 | 0.3 wt% | |
| density | ASTM D-792 | 1.04 |
| Mechanical properties | Test Condition | Test Method | TAIDA TAIWAN/5000S |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23℃1/2" | ASTM D-256 | 13 (2.4) kg.cm/cm(ft.1b/in) |
| Rockwell hardness | 119 | ||
| elongation | 断裂,23°C,3.18mm | ASTM D638 | 20 % |
| flexural coefficient | 23℃ 2.8mm/min | ASTM D-790 | 30000 kg/cm |
| 23℃ 2.8mm/min | ASTM D-790 | 420000 psi | |
| tensile strength | 1/8"，断裂 | ASTM D-638 | 380 kg/cm |
| Break,23°C,3.18mm | ASTM D638 | 37.2 Mpa | |
| bending strength | 23℃ 2.8mm/min | ASTM D-790 | 800 kg/cm |
| tensile strength | 23℃，屈服 | ASTM D-638 | 480 kg/cm |
| Impact strength of cantilever beam gap | 23℃1/8" | ASTM D-256 | 16 (2.9) kg.cm/cm(ft.1b/in) |
| tensile strength | 屈服,23°C,3.18mm | ASTM D638 | 46.9 Mpa |
| bending strength | 屈服,23°C | ASTM D790 | 78.6 Mpa |
| elongation at break | 1/8" | ASTM D-638 | 20 % |
| Flexural modulus | 23°C | ASTM D790 | 2900 Mpa |
| bending strength | 23℃ 2.8mm/min | ASTM D-790 | 11400 psi |
| tensile strength | 1/8"，断裂 | ASTM D-638 | 5400 psi |
| 23℃，屈服 | ASTM D-638 | 6800 psi |
| Electrical performance | Test Condition | Test Method | TAIDA TAIWAN/5000S |
|---|---|---|---|
| arc resistance | UL -746A | 15 Arcs | |
| High arc combustion index (HAI) | 1.57mm | UL 746 | |
| UL -746A | in/min | ||
| High Voltage Arc Traceability Rate (HVTR) | 1.57mm | UL 746 | mm/min |
| Hot wire ignition (HWI) | 1.57mm | UL 746 | sec |
| processability | Test Condition | Test Method | TAIDA TAIWAN/5000S |
|---|---|---|---|
| Relative Heat Index (RTI) | UL -746B | 60 °C |
| flammability | Test Condition | Test Method | TAIDA TAIWAN/5000S |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | HB |
| physical property | Test Condition | Test Method | TAIDA TAIWAN/5000S |
|---|---|---|---|
| melt mass-flow rate | 200°C/5.0kg | ASTM D1238 | 2.3 g/10min |
| Shrinkage rate | MD | ASTM D955 | <0.40 % |
| Water absorption rate | 24hr | ASTM D570 | <0.30 % |
| Shrinkage rate | ASTM D-955 | 0.4 % | |
| density | ASTM D792 | 1.04 g/cm³ | |
| melt mass-flow rate | 220°C/10.0kg | ASTM D1238 | 23 g/10min |
| Thermal performance | Test Condition | Test Method | TAIDA TAIWAN/5000S |
|---|---|---|---|
| Heat distortion temperature | 未退火，HDT | ASTM D-648 | 89 (192) ℃(F) |
| Resistance to hot wire combustion | UL -746A | 15 Sece | |
| vicat | ASTM D15254 | 104 °C | |
| ASTM D-1525 | 104 °C | ||
| RTI Imp | 1.6mm | UL 746 | 60.0 °C |
| Heat distortion temperature | 1.8MPa,未退火,12.7mm，HDT | ASTM D648 | 83.0 °C |
| RTI Str | 1.6mm | UL 746 | 60.0 °C |
| RTI Elec | 1.6mm | UL 746 | 60.0 °C |
| UL flame retardant rating | UL 94 | HB |
Contact Us
Get App
Top