Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA6 6FLST1 DOMO CHEM GERMANY
--
Automotive sector,Electric wire,Cable
standard
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | DOMO CHEM GERMANY/6FLST1 |
|---|---|---|---|
| Rockwell hardness | R-Scale | ISO 2039-2 | 120 |
| thermal performance | Test Condition | Test Method | DOMO CHEM GERMANY/6FLST1 |
|---|---|---|---|
| Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 170 °C |
| 1.8MPa,Unannealed | ISO 75-2/A | 75.0 °C | |
| Melting temperature | ISO 11357-3 | 218to222 °C | |
| Vicat softening temperature | ISO 306/B50 | 205 °C |
| mechanical properties | Test Condition | Test Method | DOMO CHEM GERMANY/6FLST1 |
|---|---|---|---|
| Bending modulus | ISO 178 | 2000 Mpa | |
| Tensile modulus | ISO 527-2/1 | 2800 Mpa | |
| Tensile strain | Yield | ISO 527-2/50 | 12 % |
| tensile strength | Yield | ISO 527-2/50 | 65.0 Mpa |
| Electrical performance | Test Condition | Test Method | DOMO CHEM GERMANY/6FLST1 |
|---|---|---|---|
| Surface resistivity | IEC 60093 | 1E+13 ohms | |
| Volume resistivity | IEC 60093 | 1E+15 ohms·cm |
| Physical properties | Test Condition | Test Method | DOMO CHEM GERMANY/6FLST1 |
|---|---|---|---|
| melt mass-flow rate | 275°C/0.325kg | ISO 1133 | 9.0 g/10min |
| impact performance | Test Condition | Test Method | DOMO CHEM GERMANY/6FLST1 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 45 kJ/m² |
| flammability | Test Condition | Test Method | DOMO CHEM GERMANY/6FLST1 |
|---|---|---|---|
| UL flame retardant rating | 0.8mm | UL 94 | HB |