Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 K225-KS DSM HOLAND
Akulon®
Electronic field、Electrical field
Flame retardant、Halogen-free、Thermal stability
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | DSM HOLAND/K225-KS |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 60 kJ/m² |
| -30°C | ISO 179/1eU | 55 kJ/m² |
| Electrical performance | Test Condition | Test Method | DSM HOLAND/K225-KS |
|---|---|---|---|
| dielectric strength | IEC 60243-1 | 30 KV/mm | |
| Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm | |
| Dissipation Factor | 100Hz | IEC 60250 | 9E-03 |
| relative permittivity | 100Hz | IEC 60250 | 3.30 |
| 1MHz | IEC 60250 | 3.20 | |
| Surface Resistivity | IEC 60093 | -- ohms | |
| Dissipation Factor | 1MHz | IEC 60250 | 0.020 |
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | V |
| Mechanical properties | Test Condition | Test Method | DSM HOLAND/K225-KS |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 3800 Mpa | |
| Nominal tensile fracture strain | ISO 527-2 | 8.0 % | |
| Tensile strain | 屈服 | ISO 527-2 | 3.5 % |
| tensile strength | 屈服 | ISO 527-2 | 80.0 Mpa |
| flammability | Test Condition | Test Method | DSM HOLAND/K225-KS |
|---|---|---|---|
| Hot filament ignition temperature | 0.38mm | IEC 60695-2-13 | 960 °C |
| Burning wire flammability index | 0.38mm | IEC 60695-2-12 | 960 °C |
| UL flame retardant rating | 1.5mm | IEC 60695-11-10,-20 | V-0 |
| Burning wire flammability index | 1.5mm | IEC 60695-2-12 | 960 °C |
| Hot filament ignition temperature | 1.5mm | IEC 60695-2-13 | 960 °C |
| UL flame retardant rating | 0.38mm | IEC 60695-11-10,-20 | V-0 |
| physical property | Test Condition | Test Method | DSM HOLAND/K225-KS |
|---|---|---|---|
| Shrinkage rate | TD | ISO 294-4 | 0.91 % |
| MD | ISO 294-4 | 1.1 % | |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 2.5 % |
| 饱和,23°C | ISO 62 | 9.0 % |
| Thermal performance | Test Condition | Test Method | DSM HOLAND/K225-KS |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 220 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 180 °C |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 75.0 °C | |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 9E-05 cm/cm/°C |
| TD | ISO 11359-2 | 9E-05 cm/cm/°C |
Contact Us
Get App
Top