Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPO(PPE)+PS+PA NORYL GTX™ GTX840 resin SABIC
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC/NORYL GTX™ GTX840 resin |
|---|---|---|---|
| Impact strength of cantilever beam gap | -30°C8 | ISO 180/1A | 11 kJ/m² |
| -30°C | ASTM D256 | 90 J/m | |
| 23°C | ASTM D256 | 94 J/m | |
| Charpy Notched Impact Strength | -30°C | ISO 179/2C | 11 kJ/m² |
| 23°C7 | ISO 179/1eA | 11 kJ/m² | |
| Impact strength of cantilever beam gap | 23°C8 | ISO 180/1A | 11 kJ/m² |
| hardness | Test Condition | Test Method | SABIC/NORYL GTX™ GTX840 resin |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 108 |
| Mechanical properties | Test Condition | Test Method | SABIC/NORYL GTX™ GTX840 resin |
|---|---|---|---|
| Flexural modulus | 50.0mm跨距4 | ASTM D790 | 11900 MPa |
| elongation | 断裂3 | ASTM D638 | 2.0 % |
| tensile strength | 断裂 | ISO 527-2/5 | 198 MPa |
| bending strength | --5,6 | ISO 178 | 280 MPa |
| Flexural modulus | --5 | ISO 178 | 12300 MPa |
| Tensile modulus | -- | ISO 527-2/1 | 13900 MPa |
| bending strength | 屈服,50.0mm跨距4 | ASTM D790 | 249 MPa |
| tensile strength | 断裂3 | ASTM D638 | 178 MPa |
| elongation | 断裂 | ISO 527-2/5 | 2.0 % |
| Tensile modulus | --2 | ASTM D638 | 13500 MPa |
| physical property | Test Condition | Test Method | SABIC/NORYL GTX™ GTX840 resin |
|---|---|---|---|
| density | ASTMD792 | 1.45 g/cm³ | |
| Shrinkage rate | MD:3.20mm | 内部方法 | 0.24to0.27 % |
| Water absorption rate | 平衡,23°C | ASTM D570 | 0.30 % |
| 平衡,23°C,50%RH | ISO 62 | 0.10 % | |
| Shrinkage rate | TD:3.20mm | 内部方法 | 0.60to0.63 % |
| Melt volume flow rate | 220°C/5.0kg | ISO 1133 | 10.0 cm³/10min |
| Thermal performance | Test Condition | Test Method | SABIC/NORYL GTX™ GTX840 resin |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火,64.0mm跨距9，HDT | ISO 75-2/Bf | 258 °C |
| 1.8MPa,未退火,6.40mm，HDT | ASTM D648 | 247 °C | |
| vicat | ISO 306/B50 | 246 °C | |
| Linear coefficient of thermal expansion | TD:-40到40°C | ASTME831 | 9.0E-5到9.4E-5 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,未退火,6.40mm，HDT | ASTM D648 | 260 °C |
| 1.8MPa,未退火,64.0mm跨距9，HDT | ISO 75-2/Af | 244 °C | |
| Linear coefficient of thermal expansion | MD:-40到40°C | ASTME831 | 1.6E-5到2.0E-5 cm/cm/°C |
Contact Us
Get App
Top