Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPA HTN42G30EF NC010 DUPONT JAPAN
Zytel® 
Electronic and Electrical
Thermal stability、Glass fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodDUPONT JAPAN/HTN42G30EF NC010
Impact strength of simply supported beam without notch23°CISO 179/1eU35 kJ/m²
-30°CISO 179/1eU35 kJ/m²
Mechanical propertiesTest ConditionTest MethodDUPONT JAPAN/HTN42G30EF NC010
Tensile modulusISO 527-211700 Mpa
bending strengthISO 178210 Mpa
Tensile strain断裂ISO 527-21.7 %
Flexural modulusISO 17811300 Mpa
tensile strength 断裂ISO 527-2134 Mpa
Electrical performanceTest ConditionTest MethodDUPONT JAPAN/HTN42G30EF NC010
dielectric strengthIEC 60243-133 KV/mm
Volume resistivityIEC 62631-3-11.0E+16 ohms·m
Compared to the Leakage Tracking Index (CTI)IEC 60112 V
flammabilityTest ConditionTest MethodDUPONT JAPAN/HTN42G30EF NC010
Hot filament ignition temperature1.5 mmIEC 60695-2-13800 °C
3.0 mmIEC 60695-2-13825 °C
UL flame retardant ratingUL 94V-0
Hot filament ignition temperature0.40 mmIEC 60695-2-13750 °C
Burning wire flammability index3.0 mmIEC 60695-2-12960 °C
1.5 mmIEC 60695-2-12960 °C
0.40 mmIEC 60695-2-12960 °C
physical property Test ConditionTest MethodDUPONT JAPAN/HTN42G30EF NC010
Biobased carbon contentISO 16620-221 %
Shrinkage rate流量ISO 294-40.40 %
横向流量ISO 294-40.90 %
Thermal performanceTest ConditionTest MethodDUPONT JAPAN/HTN42G30EF NC010
Linear coefficient of thermal expansion流动 : -40 到 23°CISO 11359-21.7E-5 cm/cm/°C
RTI Imp3.0 mmUL 746120 °C
0.40 mmUL 746115 °C
melting temperatureISO 11357-3314 °C
Linear coefficient of thermal expansion横向 : -40 到 23°CISO 11359-24.3E-5 cm/cm/°C
RTI Elec0.40 mmUL 746130 °C
RTI3.0 mmUL 746130 °C
RTI Elec3.0 mmUL 746130 °C
Linear coefficient of thermal expansion流动 : 55 到 160°CISO 11359-22.0E-5 cm/cm/°C
横向 : 55 到 160°CISO 11359-28.4E-5 cm/cm/°C
RTI0.40 mmUL 746125 °C
Linear coefficient of thermal expansion流动ISO 11359-22.0E-5 cm/cm/°C
横向ISO 11359-25.1E-5 cm/cm/°C
injectionTest ConditionTest MethodDUPONT JAPAN/HTN42G30EF NC010
TemperatureDrying Recommendedyes
Suggested maximum moisture content0.10 %
Drying time - hot air dryer6.0 to 8.0 hr
Processing (melt) temperature325 to 335 °C
drying temperature100 °C
Temperature110 to 130 °C

Contact Us

Get App

Top