Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PSU 3500 SOLVAY USA
UDEL®
Home appliance components,Industrial components
Hydrolysis resistance,Chemical resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | SOLVAY USA/3500 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed,Injection | ASTM D648 | 200 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 5.2E-05 cm/cm/°C |
| mechanical properties | Test Condition | Test Method | SOLVAY USA/3500 |
|---|---|---|---|
| Bending modulus | ASTM D790 | 2620 Mpa | |
| bending strength | ASTM D790 | 125 Mpa | |
| elongation | Yield | ASTM D638 | 6.5 % |
| Tensile modulus | ASTM D638 | 2690 Mpa | |
| tensile strength | ASTM D638 | 88.9 Mpa |
| Electrical performance | Test Condition | Test Method | SOLVAY USA/3500 |
|---|---|---|---|
| Dielectric constant | 1MHz | ASTM D150 | 3.54 |
| 1kHz | ASTM D150 | 3.50 | |
| 60Hz | ASTM D150 | 3.51 | |
| Dielectric strength | ASTM D149 | 15 KV/mm | |
| Dissipation factor | 1MHz | ASTM D150 | 5.6E-03 |
| 60Hz | ASTM D150 | 1.7E-03 | |
| 1kHz | ASTM D150 | 2.2E-03 | |
| Volume resistivity | ASTM D257 | 1.7E+15 ohms·cm |
| Physical properties | Test Condition | Test Method | SOLVAY USA/3500 |
|---|---|---|---|
| density | ASTM D792 | 1.37 g/cm³ | |
| melt mass-flow rate | 380°C/2.16kg | ASTM D1238 | 58 g/10min |
| Shrinkage rate | MD | ASTM D955 | 0.60 % |
| Water absorption rate | ASTM D570 | 1.9 % | |
| 24hr | ASTM D570 | 0.50 % |
| impact performance | Test Condition | Test Method | SOLVAY USA/3500 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 53 J/m |
| flammability | Test Condition | Test Method | SOLVAY USA/3500 |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | V-0 |