Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPS VAMPSTAT F 60GC 06 V0 28 VAMP TECH ITALY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | VAMP TECH ITALY/VAMPSTAT F 60GC 06 V0 28 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/A | 4.0 kJ/m² | |
| Suspended wall beam without notch impact strength | ISO 180 | 15 kJ/m² |
| Mechanical properties | Test Condition | Test Method | VAMP TECH ITALY/VAMPSTAT F 60GC 06 V0 28 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 1.0 % |
| Tensile modulus | ASTM D638 | 24000 MPa | |
| tensile strength | 屈服 | ASTM D638 | 130 MPa |
| Electrical performance | Test Condition | Test Method | VAMP TECH ITALY/VAMPSTAT F 60GC 06 V0 28 |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | 1E+04 ohms |
| flammability | Test Condition | Test Method | VAMP TECH ITALY/VAMPSTAT F 60GC 06 V0 28 |
|---|---|---|---|
| UL flame retardant rating | 3.2mm | UL 94 | V-0 |
| 1.6mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | VAMP TECH ITALY/VAMPSTAT F 60GC 06 V0 28 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.20 % |
| density | ASTM D792 | 1.72 g/cm³ | |
| Shrinkage rate | TD | ASTM D955 | 0.60 % |
| Thermal performance | Test Condition | Test Method | VAMP TECH ITALY/VAMPSTAT F 60GC 06 V0 28 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648A | 250 °C |
| vicat | ASTM D15252 | 265 °C | |
| RTI Imp | UL 746 | 220 °C | |
| RTI | UL 746 | 220 °C | |
| RTI Elec | UL 746 | 220 °C |
Contact Us
Get App
Top