Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ASA+AES 813 USA Network Polymers
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | USA Network Polymers/ 813 |
|---|---|---|---|
| Impact strength of cantilever beam gap | -40°C,3.18mm | ASTM D256 | 53 J/m |
| Dart impact | 23°C,TotalEnergy | ASTM D3763 | 33.0 J |
| -40°C,TotalEnergy | ASTM D3763 | 22.0 J | |
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 410 J/m |
| hardness | Test Condition | Test Method | USA Network Polymers/ 813 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 85 |
| Mechanical properties | Test Condition | Test Method | USA Network Polymers/ 813 |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 2000 MPa | |
| Flexural modulus | ASTM D790 | 1930 MPa | |
| tensile strength | 屈服 | ASTM D638 | 33.8 MPa |
| bending strength | ASTM D790 | 54.5 MPa |
| flammability | Test Condition | Test Method | USA Network Polymers/ 813 |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | HB |
| physical property | Test Condition | Test Method | USA Network Polymers/ 813 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.50to0.60 % |
| density | ASTM D792 | 1.05 g/cm³ | |
| melt mass-flow rate | 220°C/10.0kg | ASTM D1238 | 8.0 g/10min |
| Thermal performance | Test Condition | Test Method | USA Network Polymers/ 813 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火,3.18mm，HDT | ASTM D648 | 70.0 °C |
| 1.8MPa,未退火,12.7mm，HDT | ASTM D648 | 77.0 °C | |
| vicat | ASTM D15255 | 101 °C |
Contact Us
Get App
Top