Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 YH-900 SINOPEC BALING
--
Monofilament、Suitable for general inje、Extrusion molding、Flame retardant modificat、Monofilament, etc
Medium viscosity、 Medium viscosity
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | SINOPEC BALING/YH-900 |
|---|---|---|---|
| density | --- | GB 1033-86 | 1.157 g/cm |
| relative viscosity | --- | GB/T 1632-93 | 2.90±0.03 --- |
| Mechanical properties | Test Condition | Test Method | SINOPEC BALING/YH-900 |
|---|---|---|---|
| Shrinkage rate | --- | GB/T 1043-93 | 1.40 % |
| Flexural modulus | --- | GB 9341-88 | 2026 Mpa |
| tensile strength | --- | GB 1040-92 | 66.5 Mpa |
| elongation at break | --- | GB 1040-92 | 153.4 % |
| hardness | --- | GB 9341-88 | 63.8 R |
| bending strength | --- | GB 9341-88 | 83.6 Mpa |
| Notch impact strength | --- | IEC(CTI) | 22.4 KJ/m |
| Electrical performance | Test Condition | Test Method | SINOPEC BALING/YH-900 |
|---|---|---|---|
| GB 1044-70 | 7.2×10 Ω | ||
| Surface Resistivity | GB 1044-70 | 8.0×10 Ω | |
| dielectric loss angle tangent | GB 1044-70 | 4.3×10 | |
| dielectric constant | --- | GB 1044-70 | 1.3 --- |
| Volume resistivity | GB 1044-70 | 6.7×10 Ω.cm |
| Thermal performance | Test Condition | Test Method | SINOPEC BALING/YH-900 |
|---|---|---|---|
| 74.1 °C | |||
| melting point | 217～223 °C |
Contact Us
Get App
Top