Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PUR,Unspecified Tool-A-Thane UT-10 Urethane Tooling & Engineering Corp
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | Urethane Tooling & Engineering Corp/Tool-A-Thane UT-10 |
---|---|---|---|
Shore hardness | 邵氏A | 98 | |
邵氏D | 62 |
Supplementary Information | Test Condition | Test Method | Urethane Tooling & Engineering Corp/Tool-A-Thane UT-10 |
---|---|---|---|
Puncture Strength | 推荐最佳寿命 | 10 % | |
BayshoreResistance-NBSIndex | 55.0 |
film | Test Condition | Test Method | Urethane Tooling & Engineering Corp/Tool-A-Thane UT-10 |
---|---|---|---|
GravesTear | 148.9 kN/m |
Mechanical properties | Test Condition | Test Method | Urethane Tooling & Engineering Corp/Tool-A-Thane UT-10 |
---|---|---|---|
coefficient of friction | 与钢-动态 | 0.30 | |
wear resistance | NBS指数 | 375 |
physical property | Test Condition | Test Method | Urethane Tooling & Engineering Corp/Tool-A-Thane UT-10 |
---|---|---|---|
density | 1.09 g/cm³ | ||
Shrinkage rate | MD | 1.7 % |
elastomer | Test Condition | Test Method | Urethane Tooling & Engineering Corp/Tool-A-Thane UT-10 |
---|---|---|---|
tear strength | 开裂 | ASTM D470 | 22 kN/m |
tensile strength | 抗张强度 | 50.0 MPa | |
300%应变 | 46.2 MPa | ||
100%应变 | 17.2 MPa | ||
伸长率(断裂) | 350 % | ||
compression set | 70°C,22hr | 42 % |
Thermal performance | Test Condition | Test Method | Urethane Tooling & Engineering Corp/Tool-A-Thane UT-10 |
---|---|---|---|
brittle temperature | -67.8 °C |
Contact Us
Get App
Top