Material Comparison
Add Comparison Model
Select Products for Comparison (1/4)
Highlight Differences
Hide Same
Product Name / Manufacturer / Model
Grade
Reference Price
| mechanical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/JW-03 CF2001 |
|---|---|---|---|
| bending strength | ISO 178 | 79.0 Mpa | |
| Friction coefficient | Dynamic2 | JISK7218 | 0.21 |
| Wear factor | 0.060MPa,0.15m/sec6 | JISK7218 | 80 10^-8mm³/N·m |
| Nominal tensile fracture strain | ISO 527-2 | 35 % | |
| Wear factor | 0.060MPa,0.15m/sec7 | JISK7218 | 220 10^-8mm³/N·m |
| 0.98MPa,0.30m/sec5 | JISK7218 | 21 10^-8mm³/N·m | |
| 0.98MPa,0.30m/sec4 | JISK7218 | <1.0 10^-8mm³/N·m | |
| Friction coefficient | Steel - Dynamic3 | JISK7218 | 0.17 |
| Bending modulus | ISO 178 | 2400 Mpa | |
| Tensile modulus | ISO 527-2 | 2600 Mpa | |
| tensile strength | ISO 527-2 | 54.0 Mpa | |
| Physical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/JW-03 CF2001 |
| Melt Volume Flow Rate (MVR) | 190°C/2.16kg | ISO 1133 | 39.0 cm3/10min |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.60 % |
| Shrinkage rate | TD:2.00mm | ISO 294-4 | 1.7 % |
| melt mass-flow rate | 190°C/2.16kg | ISO 1133 | 46 g/10min |
| Shrinkage rate | MD:2.00mm | ISO 294-4 | 1.9 % |
| flammability | Test Condition | Test Method | JAPAN POLYPLASTIC/JW-03 CF2001 |
| UL flame retardant rating | UL 94 | HB | |
| Supplementary Information | Test Condition | Test Method | JAPAN POLYPLASTIC/JW-03 CF2001 |
| ColourNumber | CF2001 | ||
| thermal performance | Test Condition | Test Method | JAPAN POLYPLASTIC/JW-03 CF2001 |
| Linear coefficient of thermal expansion | MD:23to55°C | Internal Method | 1.2E-04 cm/cm/°C |
| TD:23to55°C | Internal Method | 1.2E-04 cm/cm/°C | |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 98.0 °C |
| hardness | Test Condition | Test Method | JAPAN POLYPLASTIC/JW-03 CF2001 |
| Rockwell hardness | M-Scale | ISO 2039-2 | 80 |
