Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM FU2020 KEP KOREA
KEPITAL®
--
Good toughness, high impa
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | KEP KOREA/FU2020 |
|---|---|---|---|
| UL flame retardant rating | 0.8mm | UL 94 HB |
| Basic performance | Test Condition | Test Method | KEP KOREA/FU2020 |
|---|---|---|---|
| Shrinkage rate | flow,2.00MM | ASTM D955 | 1.4 % |
| melt mass-flow rate | 190℃/2.16kg | ASTM D1238 | 3.5 g/10 min |
| density | ASTM D792 | 1.36 g/cm³ | |
| Water absorption rate | Equilibrium,23℃,60%rh | ASTM D570 | 0.24 % |
| Mechanical properties | Test Condition | Test Method | KEP KOREA/FU2020 |
|---|---|---|---|
| tensile strength | Yield,23℃ | ASTM D638 | 42.0 MPa |
| bending strength | 23°C | ASTM D790 | 51.0 MPa |
| Flexural modulus | 23°C | ASTM D790 | 1490 MPa |
| IZOD notch impact strength | 3.20mm | ASTM D256 | 191 J/m |
| tensile elongation | Break,23℃ | ASTM D638 | 300 % |
| Electrical performance | Test Condition | Test Method | KEP KOREA/FU2020 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+14 ohm·cm | |
| Surface Resistivity | ASTM D257 | 1E+16 ohms |
| Thermal performance | Test Condition | Test Method | KEP KOREA/FU2020 |
|---|---|---|---|
| heat distortion temperature | 1.8MPa,未退火 | ASTM D648 | 87.0 °C |
| flow,20 to 80°C | ASTM D696 | 0.00013 cm/cm/°C | |
| melting temperature | ASTM D3418 | 165 °C |
Contact Us
Get App
Top