plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 9950 WH000 SOLVAY USA
KALIX®
Fitness equipment,Automotive Applications
Glass fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodSOLVAY USA/9950 WH000
Hot deformation temperature0.45 MPa, UnannealedISO 75-2/B262 °C
1.8 MPa, UnannealedISO 75-2/A254 °C
Melting temperatureASTM D3418260 °C
mechanical propertiesTest ConditionTest MethodSOLVAY USA/9950 WH000
Bending modulusISO 17815900 Mpa
bending strength3.5% StrainISO 178379 Mpa
Tensile modulusISO 527-218500 Mpa
Tensile strainBreakISO 527-22.3 %
tensile strengthYieldISO 527-2245 Mpa
Electrical performanceTest ConditionTest MethodSOLVAY USA/9950 WH000
Dielectric constant2.40 GHzASTM D25204.15
1.00 GHzASTM D25204.15
Dissipation factor2.40 GHzASTM D25200.011
1.00 GHzASTM D25200.011
Physical propertiesTest ConditionTest MethodSOLVAY USA/9950 WH000
Shrinkage rateFlowInternal Method0.13 %
横向FlowInternal Method0.32 %
Water absorption rate24 hr, 23°CASTM D5700.37 %
impact performanceTest ConditionTest MethodSOLVAY USA/9950 WH000
Suspended wall beam without notch impact strengthISO 18068 kJ/m²
flammabilityTest ConditionTest MethodSOLVAY USA/9950 WH000
0.60 mm, All Colors0.60 mm, 所有颜色HB
injectionTest ConditionTest MethodSOLVAY USA/9950 WH000
drying temperature80 °C
drying time4.0 to 12 hr
Mold temperature80 to 120 °C
Processing (melt) temperature285 to 305 °C
Suggested maximum moisture content0.090 %
Temperature at the front of the material cylinder280 °C
Temperature at the rear of the barrel250 °C