Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA12 7033 SA01 MED ARKEMA USA
--
Medical and nursing suppl
Low wear
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ARKEMA USA/7033 SA01 MED |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | -- |
| 23°C | ISO 179/1eU | -- |
| hardness | Test Condition | Test Method | ARKEMA USA/7033 SA01 MED |
|---|---|---|---|
| Supporting hardness | 邵氏 D, 15 秒 | ISO 7619-1 | 61 |
| Mechanical properties | Test Condition | Test Method | ARKEMA USA/7033 SA01 MED |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 414 Mpa | |
| Nominal tensile fracture strain | ISO 527-2 | > 50 % | |
| Tensile stress | 屈服 | ISO 527-2 | 23.0 Mpa |
| Tensile strain | 屈服 | ISO 527-2 | 22 % |
| abrasion resistance | ISO 4649 | 41.0 mm³ |
| squeeze out | Test Condition | Test Method | ARKEMA USA/7033 SA01 MED |
|---|---|---|---|
| drying temperature | 70 到 80 °C | ||
| drying time | 5.0 到 7.0 hr | ||
| Melt Temperature | 220 到 250 °C |
| physical property | Test Condition | Test Method | ARKEMA USA/7033 SA01 MED |
|---|---|---|---|
| Water absorption rate | 平衡, 23°C, 50% RH | ISO 62 | 1.4 % |
| Shrinkage rate | 流量 | ISO 294-4 | 1.2 % |
| Water absorption rate | 饱和, 23°C | ISO 62 | 0.76 % |
| Shrinkage rate | 横向流量 | ISO 294-4 | 1.5 % |
| Thermal performance | Test Condition | Test Method | ARKEMA USA/7033 SA01 MED |
|---|---|---|---|
| Melting temperature 2 | ISO 11357-3 | 172 °C | |
| vicat | ISO 306/B50 | 129 °C |
| injection | Test Condition | Test Method | ARKEMA USA/7033 SA01 MED |
|---|---|---|---|
| Temperature | 25 到 60 °C | ||
| Processing (melt) temperature | 230 到 290 °C | ||
| drying temperature | 70 到 80 °C | ||
| drying time | 5.0 到 7.0 hr |
Contact Us
Get App
Top