Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TSU InnoTuf® HP-2195A Innovative Polymers, Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | Innovative Polymers, Inc./InnoTuf® HP-2195A |
|---|---|---|---|
| Taber abraser | 1000Cycles,1000g,H-18转轮 | ASTM D4060 | 12.0 mg |
| thermosetting | Test Condition | Test Method | Innovative Polymers, Inc./InnoTuf® HP-2195A |
|---|---|---|---|
| Thermosetting components | 脱模时间 | 240to360 min | |
| 硬化法 | 按重量计算的混合比:28按容量计算的混合比:28 | ||
| 树脂 | 按重量计算的混合比:100按容量计算的混合比:100 |
| Uncured Properties | Test Condition | Test Method | Innovative Polymers, Inc./InnoTuf® HP-2195A |
|---|---|---|---|
| Viscosity | 固化时间(25°C) | 1.7E+02 hr | |
| 25°C4 | 7.1 Pa·s | ||
| GelTime | 20to30 min | ||
| 25°C2 | 0.40 Pa·s | ||
| 25°C3 | 3.3 Pa·s |
| Cured Properties | Test Condition | Test Method | Innovative Polymers, Inc./InnoTuf® HP-2195A |
|---|---|---|---|
| tear strength | ASTM D624 | 81.4 kN/m | |
| elongation | 断裂 | ASTM D638 | 400 % |
| tensile strength | ASTM D638 | 26.5 MPa | |
| Shore hardness | ShoreA | ASTM D2240 | 91to99 |
| physical property | Test Condition | Test Method | Innovative Polymers, Inc./InnoTuf® HP-2195A |
|---|---|---|---|
| density | 基体树脂 | 1.08 g/cm³ | |
| Hardener | 1.08 g/cm³ | ||
| Cured | 1.08 g/cm³ | ||
| Shrinkage rate | MD | ASTM D2566 | 0.20to0.60 % |
| elastomer | Test Condition | Test Method | Innovative Polymers, Inc./InnoTuf® HP-2195A |
|---|---|---|---|
| tear strength | 开裂 | ASTM D470 | 29 kN/m |
Contact Us
Get App
Top