Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

Phenolic Plenco 03509 (Transfer) Plastics Engineering Co.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | Plastics Engineering Co./Plenco 03509 (Transfer) |
---|---|---|---|
Charpy Notched Impact Strength | ASTM D256 | 22.1 J/m | |
Impact strength of cantilever beam gap | ASTM D256 | 20 J/m |
hardness | Test Condition | Test Method | Plastics Engineering Co./Plenco 03509 (Transfer) |
---|---|---|---|
Rockwell hardness | E计秤 | ASTM D785 | 85 |
Mechanical properties | Test Condition | Test Method | Plastics Engineering Co./Plenco 03509 (Transfer) |
---|---|---|---|
elongation | 断裂 | ASTM D638 | 0.80 % |
tensile strength | ASTM D638 | 61.0 MPa | |
compressive strength | ASTM D695 | 201 MPa | |
Tensile modulus | ASTM D638 | 10700 MPa | |
Flexural modulus | ASTM D790 | 9840 MPa | |
bending strength | ASTM D790 | 99.5 MPa |
Electrical performance | Test Condition | Test Method | Plastics Engineering Co./Plenco 03509 (Transfer) |
---|---|---|---|
dielectric strength | --3 | ASTM D149 | 16 kV/mm |
Volume resistivity | ASTM D257 | 5.3E+11 ohms·cm | |
Dissipation Factor | 1MHz | ASTM D150 | 0.041 |
dielectric constant | 1MHz | ASTM D150 | 5.30 |
dielectric strength | --4 | ASTM D149 | 12 kV/mm |
Compared to the Leakage Tracking Index (CTI) | CTI | UL 746 | PLC 3 |
arc resistance | ASTM D495 | 161 sec |
flammability | Test Condition | Test Method | Plastics Engineering Co./Plenco 03509 (Transfer) |
---|---|---|---|
UL flame retardant rating | 3.0mm | UL 94 | V-0 |
Limiting Oxygen Index | ASTM D2863 | 38 % |
physical property | Test Condition | Test Method | Plastics Engineering Co./Plenco 03509 (Transfer) |
---|---|---|---|
Shrinkage rate | MD | ASTM D955 | 0.30 % |
Water absorption rate | 24hr | ASTM D570 | 0.14 % |
Apparent density | ASTM D1895 | 0.64 g/cm³ | |
density | ASTM D792 | 1.60 g/cm³ |
Thermal performance | Test Condition | Test Method | Plastics Engineering Co./Plenco 03509 (Transfer) |
---|---|---|---|
Heat distortion temperature | 1.8MPa,未退火,HDT | ASTM D648 | 194 °C |
Continuous use temperature | ASTM D794 | 204 °C | |
Linear coefficient of thermal expansion | MD | ASTME831 | 4.7E-05 cm/cm/°C |
Contact Us
Get App
Top